Announcement

Collapse
No announcement yet.

HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

    You should have 28V on pin 1 i think...check voltages on PR118, PQ18, PQ17 & PR127 PR129...

    Comment


      #22
      Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

      thanks for schematic and bios file.., JOOOOSSSSS GANDOSSS (ferry nice )

      Comment


        #23
        Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

        Hi,
        where I can find PQ12?

        Comment


          #24
          Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

          Originally posted by ryogadan View Post
          Hi,
          where I can find PQ12?
          It should be around PU12...
          It's a high driving FET for CPU CORE voltage...
          If you won't find it I'll take a pic when I'll have a time...

          Comment


            #25
            Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

            ec & main bios plase !!!
            hp part 650199-001
            daor13mb6e1 rev.e

            Comment


              #26
              Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

              Osman...there's main BIOS dump,just check 1st page...if You won't get EC pm me & will upload (if I've got it)

              Comment


                #27
                Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                hi tank you for this suport

                Comment


                  #28
                  Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                  i want to reed kb9012 program plz hep me

                  Comment


                    #29
                    Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                    thanks a lot

                    Comment


                      #30
                      Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                      i need bios file but my board is with en25f32 , kb3930qf is this programable ? , if yes, what can i use to read this

                      i found bios and ec, but i did not find ec i.c.
                      Last edited by angel-boy; 12-17-2015, 08:19 AM.

                      Comment


                        #31
                        Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                        chenge pu3

                        Comment


                          #32
                          Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                          Thanks for sharing

                          Comment


                            #33
                            Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                            Originally posted by loser18 View Post
                            Also checked PU9 pin9 & getting 3.25V - This is not right, is it???
                            It's ok.
                            ACIN mean active high, while high : AC power adapter plugged.
                            in other schematic there is ACIN# mean active low, while low : AC power adapter is plugged.
                            note: # mean active low.

                            Originally posted by loser18 View Post
                            Reflashed, but got no led however all pins read 3.3V except pin4...
                            , pin4 is GND.

                            BTW, did your problem solved.

                            Comment


                              #34
                              Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                              thankyou

                              Comment


                                #35
                                Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                                This
                                Attached Files

                                Comment


                                  #36
                                  Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                                  Originally posted by loser18 View Post
                                  Reflashed, but got no led however all pins read 3.3V except pin4...

                                  Also noticed that hex of your file is different so flashed it back with original dump & got led back on & BIOS voltages are OK...

                                  BTW mine is 4mb...

                                  ATTACHING MY DUMP, SOMEONE MAY FIND IT USEFUL, BUT PLS BEAR IN MIND THAT'S UNTESTED...
                                  hi everyone, i tested the bios dump posted by LOSER18 and his working fine!

                                  really thanks!

                                  Comment


                                    #37
                                    Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                                    hi, can anybody help with bios to hp 17-g132nw, is very hard to find, my laptop started to 0,31A, with dark screen, there is no tension on cpu coil, my mb:

                                    cpu: sr2eu

                                    mb: dax1admb6f0 rev: f

                                    gpu: 216-0864018

                                    kbc: it8987e - bxa

                                    laptop has flooded keyboard so i think that firmware on kbc is damage, so i need main and ec dump, thx for any help, i post my BIOS mayby somebody can check

                                    Comment


                                      #38
                                      Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                                      If the fan spins and there is no CPU VCore, the BIOS shouldn't be the issue here. You would need to trace out why there is no CPU VCore.
                                      OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

                                      Comment


                                        #39
                                        Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                                        thanks

                                        Comment


                                          #40
                                          Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

                                          thanks

                                          Comment

                                          Working...
                                          X