jk .....but dam those stickies take up more than a complete page view ! We need a filter to not show them all the time.
-
-
Which browser? And mobile or desktop? -
MacBook Pro M1 Max Desktop Brave...maybe just just a sticky cleanup....are all of them still relevant ?Comment
-
it should be minimized with a "show more" link after 3 lines. does it show entire post for you?
Comment
-
its minimized for meComment
-
can you share screen capture?Comment
-
different stickyComment
-
Site I think will be tweaked once the current upgrade is done. I think there are some teething issues.....Comment
-
Hi everyone.
Recently scored a dead amp from a mackie srm1801 subwoofer and after fixing it, now I'm thinking about a home cinema/party subwoofer project.
Most likely I will use a 15" JBL woofer, which I already have and a diy box.
After reading the mackie user manual, I noticed that it has a 40hz HPF (labeled as "36Hz BUTTERWORTH HPF" in the SM) to protect the speaker from low frequencies. Indeed this seems to be good idea for the intended usage - professional music subwoofer, but bad for movies, where one would expect to "feel" the SUBwoofer.... -
Normally, I never post repairs this quick after I do them, because… I am usually very slow.
But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. 
I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
-
Recently acquired one of those silly Logisys acrylic power supplies and lucked into getting one of the "better" ones (most of an input filter, bridge rectifier instead of 4 diode treatment, OK-sized heatsinks, etc.) and wanted to fill out what I can on the board + get some decent caps on there (especially the primary side since I highly doubt the ones in there are actually 1000uf). My questions are:
1. How do I know what components to install re: the input filter? It seem to be missing an X cap, a resistor, and a Y cap.
2. Where can I find a good heatsink for the bridge... -
Hello, there!
The problem with this laptop is that it does not show video at all, even if I connect an external HDMI screen device to its port.
I got it disassembled, and first of all it does have its VDC in (19.81). I checked the 5 inductors having the charger plugged in, and the voltage readings are:
TURNED OFF (without pressing the power button)
1: 9.07 VDC
2 to 5: 0 VDC
TURNED ON (after pressing the power button)
1: 9.04 VDC
2: 1.203 VDC
3: 0.813 VDC
4: 3.403 VDC
5: 5.133 VDC
I'm not quite sure if... -
good afternoon.
need help.
ACER A315-53G C5V01 LA-E892P rev2A
the laptop turns on, but the display does not show.
the laptop came to me from another workshop. visually broken USB 3.0 and soldered BIOS flash drive.
I unsoldered USB 3.0 and flashed several different BIOSes, but it did not help.
+VCC_CORE 0V
+VCC_GT 0V
+VCC_SA 1.03V
+0.6VS_VTT 0.6V
+1.0VALW_PRIM 1.0V
+1.0V.VCCSTU 1.0V
+VCCIO 1.OV
+1.0VS_VCCSTG 1.0V
+1.2V_VDDQ 1.21V
+1.8VALW_PRIM 1.81V
+1.8VS 1.81V
+3VLP 3.27V
+3VALW...
Comment