Bios broken solder pad Elitebook 840 G2

[mrfomt]

Hello.
Have a HP Elitebook 840 G2, should swap the bios so I desoldered the main bios chip U365. The solder pad on pin 5 broke. si/sio0. Can't find the chip in the schematics. Maybe I could solder a wire from pin 5, but don't know where the other end of the wire should go.

[rex98]

Re: Bios broken solder pad Elitebook 840 G2

Hello.
Have a HP Elitebook 840 G2, should swap the bios so I desoldered the main bios chip U365. The solder pad on pin 5 broke. si/sio0. Can't find the chip in the schematics. Maybe I could solder a wire from pin 5, but don't know where the other end of the wire should go.

https://www.badcaps.net/forum/showpo...58&postcount=1

use that schematic

[adamski1952]

Re: Bios broken solder pad Elitebook 840 G2

Look for CN365. should be
test point 24