playstation 5 digital firmware dump
Collapse
X
-
-
I cleared the UART error logs.Leave a comment:
-
Hello everyone. I have a PS5 with 3 beeps issue. Since I am new with PS5 Bios Mod, could someone do it for me ? I have uploaded the original backup on my google drive The model on mobo is the following
Motherboard model : EDM-033
Model on the case : CFI-1200A
Drive Link : https://drive.google.com/drive/folde...yo?usp=sharing
Thanks in advance.Leave a comment:
-
Hello Everyone,
I'm stuck with a CFI-2016A which has a license problem and doesn't register its disc drive (but it works 100% on another console).
PSN logs in 100%, I can download content but as soon as I try to run/play I get "Can't use this content" / "Can't connect to the server to verify your license. Wait a while, and then try again."
Of course, trying to restore license from the PS5 menu fails with error [CE] - [105628] - [2].
Trying to reinstall system from SAFE MODE (forced) with option "Reset PS5 (Reinstall System Software) ends up at 29% systematically with error [CE] - [120239] - [7]
I found a way to get it reinstalled with >>> SAFE MODE (forced) >>> [3.Repair Console Storage] or [4.Update System Software] >>> Reboot >>> asks for USB stick with necessary file >>> all goes well until arriving in PS5 menu where the console acts stable and well.
Only game that starts is Astro's Playground but ends up crashing every single time at the same location in game with error [CE] - [108255] [1].
I suspect NOR to be in cause as I don't know this console's past.
My suspicions might be correct as after dumping the NOR, here are some observations :- Latest version installed : 25.05-11.60.00.05
- PKG reported in NOR : PKG-3486
- MAC addresses fields are full of [FF]
- Model not present at 0x001C7230 (16 Bytes) : only a bunch of [FF]
- Plastic case S/N not present at 0x001C7210 (17 Bytes) : only a bunch of [FF]
- Strange string present at 0x001C7330 over 16 bytes : PS5GNPXXXXXXXXXX (where XXXXXXXXXX are numbers beginning with 3 zeroes // example : 0001234567)
Does somebody has a CFI-2016(A) NOR dump with southbridge CXD90069GG, WiFi module J20H104 and same version (25.05-11.60.00.05) and PKG-3486 ?
Thanks !Leave a comment:
-
hi i have a dump for edm 033 how do i add the dump to here please it has 3 beeps best regardsLeave a comment:
-
-
Alguien Me Puede Ayudar Con El Bios De PS5 CFI-1015A. Modulo:C-25463Leave a comment:
-
Re: playstation 5 digital firmware dump
Writing someone else's dump to PS5 is possible. I checked personally. You need to choose the right revision. CFI-10XX & CFI-11XX are not compatible! You need to write down W25Q16JV, she is responsible for turning on the power of the console. From the unique data there is a model, and a serial number. They can be corrected by hand in the HEX editor. I have written a dump from CFI-1102A to my CFI-1116B. Now PS5 wants a drive that doesn't existWho can help with a dump from the Digital Edition of the second revision? I need CFI-1116B
Hi Can you please share the dump of CFI-1102A - Thanks.Leave a comment:
-
HELLO I HAVE A EDM-010 CFI-1016A WITH DAMAGED BIOS CHIP,CAN SOMEONE SHARE A WORKING BIOS?
AND ALSO I NEED TO MODIFY ON NOR TOOL?
I AM ASKING BECAUSE I CAN MAKE A DUMP FROM THE DEAD CHIP THAT HAS THE DATALeave a comment:
-
TRY this is for CFI-1116A I DOWNLOAD it here hope it it works for you for me am still looking for the one for CFI-1115A EDM-020Attached FilesLeave a comment:
-
jibril mohammed I just read, erase then write. The ps5 is working again. Thank you very much for the file.Leave a comment:
-
read & clear error codeAttached FilesLeave a comment:
-
Cobbes First, connect the bios chip and clear the errors, is that right? By desoldering the chip or connect with a cable?Leave a comment:
-
@Vincovitch: I would connect the PS5 to a pc/laptop via a CH314a programmer and start a UART software like ps5 we tools and clear the error logs 'errlog clear' and see if this solve the issue of three beeps.Leave a comment:
-
Hello,
I'm asking for help. I have a PS5 that beeps 3 times when you plug in the cable.
I deduced that the BIOS is corrupted.
The model is CFI-1216A. I would like to know how you do to reprogram knowing that I have a CH341 programmer and the Neo Programmer software but I don't understand which file I need to integrate to repair the BIOS?
Thank you in advanceLeave a comment:
-
Here the dump with cleared UART error log:
Attached FilesLeave a comment:
-
wifi not working and wont download updateAttached FilesLeave a comment:
-
Working dump for: CFI-1216A - 69GG - J20H104/AWXM546Attached FilesLeave a comment:
Related Topics
Collapse
-
by AhariHi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I...-
Channel: BIOS & Schematic Requests!
-
-
by Tamo NekoHello everyone,
I'm working on an Asus TUF Gaming H670-Pro motherboard and need help finding a firmware dump for the MX25VB8035F (1MB) SPI flash chip.
What Happened:
I mistakenly removed and erased this 1MB chip, thinking it was part of the main BIOS.- I later found that the board has two main BIOS chips (8MB + 16MB), which I have backups for.
- My backup for the MX25VB8035F chip is just an empty 1MB segment filled with FFs, meaning I have no valid data to restore.
- A firmware dump for the MX25VB8035F chip from the same motherboard (or a compatible
1 Photo-
Channel: BIOS & Schematic Requests!
-
by MephysisHello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"? -
by gun4asHello everyone, I have an LG 23MP48HQ-P with a mainboard EAX65543134. After a power flicker, the monitor only shows the "No Signal" message but goes to a black screen with a brief flash when an HDMI/VGA cable is plugged in. I cannot enter the OSD menu. All main voltages (18V, 5V, 3.3V) are stable under load. I made a backup of the firmware, but it was *after* the fault occurred, so my backup is likely corrupted. I flashed it back with no change in behavior. I can only find the firmware for the 24M38H model online. Could someone please share a working firmware dump for the 23MP48HQ-P?...
-
Channel: Troubleshooting Computer Displays
08-25-2025, 04:28 AM -
-
Hi, i have canon mf264 printer which is stuck in download firmware mode and I'm after a firmware memory dump for this model, so I can try to rewrite. Thanks for your kind help!07-22-2025, 04:48 AM
- Loading...
- No more items.
Leave a comment: