I have this SMDII and works fine, wanted to get a better picture from it so I made my own 9 din to
SCART cable, used a 9din cable that I found laying around, think it had a plug similar to what Samsung note 10 uses.
Pin 4 had no wires connected to it so I bridged 4 and 5 and shortened the 5 pin.
I get good picture and sound on the TV but the image is shaking alittle.
Any idea what could be the problem?
I used this schematic to make the cable.
SCART cable, used a 9din cable that I found laying around, think it had a plug similar to what Samsung note 10 uses.
Pin 4 had no wires connected to it so I bridged 4 and 5 and shortened the 5 pin.
I get good picture and sound on the TV but the image is shaking alittle.
Any idea what could be the problem?
I used this schematic to make the cable.
Comment