E-MU xboard 25

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kr315
    New Member
    • Apr 2018
    • 6
    • Poland
    #1

    E-MU xboard 25

    E-MU xboard 25 is not starting. Checked diodes on power input, voltage regulators seem fine. Again, multilayer board stops my work without schematics.
    Does anyone have schematics for this or met the problem already?
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • yuii
      ThinkPad W530 - faulty CPU regulators?
      by yuii
      Hello
      I've got two W530 boards, one with K1000M and one with K2000M graphics card. The first one had an issue of turning off under heavy CPU load after about 30 minutes or in idle. GPU load wasn't causing it to shut down. Trying to turn it back on would only make the power LED to come up for about 2 seconds without fan spin or thinklight flash, and that's it. It also wasn't charging the battery after it died.
      Gently pressing the laptop in left upper corner would fix this problem for a couple of days.
      The latter is completely dead and has the same 2-second power blink, nevermind...
      11-01-2023, 02:59 AM
    • seweryn
      Dell 2007FPb with 4 buck step-down regulators
      by seweryn
      I have monitor Dell 2007FPb. It was working good. Some day it was shut off and stay dead.
      I checked some voltages on the boards. I read this thread:
      https://www.badcaps.net/forum/showthread.php?p=335335
      and very usefull budm posts ( thanks buddy, it was great work ... ).
      My damage was typical: 3A fuse burned and ZD701 diode was shorten.
      So my board is in few points different than other described in citing thread. On my board are 4 buck converter regulators. Apart regulators 3.3V (Q6), 5V (Q14), 12V (Q9), is ther fourth, build on MOSFET Q2. Two TL1451 has together...
      04-08-2022, 11:43 AM
    • Cornito
      Denon AVR-2700H audio stops while receiver still works
      by Cornito
      Hello team,

      I've got a new issue with a Denon Avr-2700H.
      After several minutes working, receiver stops playing sound with a poc eared in the speakers.
      Receiver still work and display video with error message on display.
      Seems to me that is the main output relay.

      I'm looking for the service manual that I can't find for the moment.

      Does somebody have it?

      Regards...
      08-03-2025, 06:10 AM
    • SuperAman
      HP 15 EPK50 LA-G07EP not starting up on battery?
      by SuperAman
      Hi guys, I got an HP 15 mobo # EPK50 LA-G07EP rev 2.0 not starting up on battery? Recently the battery completely died, wouldn't hold a charge, so I used it for like 3 or 4 days until I ordered a new battery. I ordered a new "OEM" battery and replaced it. It wouldn't start with new battery, figured it was dead and plugged it up and powered it on to see that new battery was like 60% charged. So it seems It won't start on battery if it is not plugged in. It charges fine and lets me use it while not plugged in. If I use it and shut it down and try to power it back on it'll start from power...
      12-17-2024, 07:03 PM
    • Braith
      iMac (2012 model) A1419, EMCNo: 2639 not starting up
      by Braith
      Hi, EMC 2639 .iMac not starting up. Single dim diagnostic LED (LE0301) flashes off briefly when power button pressed. Working through supply rails at present (PP5V_S5 appears shorted to ground but still early days)

      Using Boardview 820-4652 but not sure if that is correct one to use. Have searched Forum but only found bios found for 2639 so far.
      Have also tried 820-00134-08 and 820-3478 but have noticed discrepancies compared to my board.

      If anyone has correct BOARDVIEW and SCHEMATIC for a EMC 2639 I would really appreciate it before I get too far into this.
      ...
      11-08-2024, 01:12 PM
    • Loading...
    • No more items.
    Working...