Try our *UPDATED* boardview, bios, & schematic search. Over 2.3 million files for download!

Wii U GamePad - Advice for corroded MLCC / ceramic SMD capacitors

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pinkcaps
    New Member
    • Oct 2026
    • 4
    • New Zealand

    #1

    Wii U GamePad - Advice for corroded MLCC / ceramic SMD capacitors

    Hi! This is my first topic, and I am somewhat new to electronics repair as a hobby, so please be gentle with me.

    I bought a used Wii U Console w/ GamePad, both as "spares or repair", to try and fix with my young kid. Console was sold as having a stuck disc drive; the GamePad was sold as broken, the screen displays fine but the touch doesn't work.

    I took the GamePad apart and removed the touch digitiser and once I get paid I'll order a new one, but whilst taking it apart I noticed some tiny capacitors which appear corroded.

    You can see them in a sort of star formation, sorry the photos aren't great. Some were/are slightly blueish. I tried cleaning with IPA, didn't improve much.

    I haven't been able to identify the capacitors' values; they don't have markings and I haven't found Wii U GamePad schematics anywhere.

    I don't have the experience to know what best to do (leave them be? educated guess about which values to replace them with? reflow with new solder?)

    I have equipment to replace them if need be, I just don't know what with. Also have a cheap ESR meter.

    Do you have any advice for me?

Related Topics

Collapse

  • l0lhaxz1
    QN65QN90A - Mainboard MLCC failed - now bootloop
    by l0lhaxz1
    Hi

    I have a QN65QN90A which was purchased around launch I guess making it about 1.5-2 years old... had been working fine until a few days ago, simply went black and would no longer turn on (at all). No standby light and no typical PSU relay click etc. Absolutely dead.

    Pulled it apart without doing much research first, suspecting the power supply as it had a faint buzz (I guess due to the forthcoming found short), investigated PSU for some time and concluded there was no fault that I could spot with the board removed.

    Came to learn after a bit more research...
    02-06-2023, 08:59 AM
  • mikay786
    820-00138-A - Advice on how to fix corroded missing / pads
    by mikay786
    Working on this a MacBook i purchased, has some corrosion around what according to the schematic is SSD CURRENT SENSE circuit. I've got 3 missing pads


    The pad left side of R3742, where would be best to run a jumper wire too?

    I assume the other 2 missing pads should be simple enough with top C3701 pad which appears to be connected to the other components on the same plane. Pad on right side of R3742 just need to make sure is connected to trace.

    Mainly struggling with left pad of R3742 and where to run a jumper, maybe a via as appears to go to multiple...
    12-20-2023, 07:14 PM
  • mcraze123
    ASUS GeForce RTX 4060 Dual OC - Water Damage / 1.8Ω Short on 12V Rail / Blown Trace & High-Side FET Repair (Log)
    by mcraze123
    Sharing a component-level repair log on an ASUS GeForce RTX 4060 Dual OC that came across the bench with liquid damage and a hard power fault. Initial Assessment & Cold Rail Measurements
    • Symptom: Card caused the ATX host bench power supply to trip over-current protection (OCP) immediately upon power-up.
    • Visual Inspection: Evidence of localized water ingress and corrosion around the main input stage and power delivery circuitry, with a physically blown PCB trace near the 12V input filter section.
    • Cold Resistance Sweep:
      • Main 12V PCIe power rail measured 1.8 Ω to ground—indicating a
    ...
    10-30-2026, 01:43 PM
  • hje_
    Lenovo Legion Y530-15ICH NM-B701 EY515 - No power, no power LED - Advice needed
    by hje_
    Hi forum, I'd like to ask advice on this Lenovo Legion Y530 board and what to check next in order to locate the fault.

    As a note: I'm a beginner. I'm a mechatronics engineer by background, so I have general electronics knowledge, but I'm new to board repair and this is the first faulty laptop I picked up and opened - so I've been learning everything as I go with the help of the board schematic, boardview, YT videos etc.

    Quick summary
    • Model is Lenovo Legion Y530-15ICH (2018) with the NM-B701 EY515 board
    • Laptop does not power on at all, charge LED does not light with
    ...
    09-03-2026, 04:05 AM
  • chth96
    Is it possible to test small ceramic disc capacitor with analogue meter?
    by chth96
    I read EBOOK of Testing Electronic Component and found that

    "In order to test the small blue resin coated ceramic disk capacitor which has 104 50v specification,it is possible to test this small ceramic capacitor by making use of analogue meter.
    Set to times 10Kohm that has 12v output from the probe to check disorder of ceramic capacitor.
    It is not uncommon that testing result of digital capacitance meter is okay,But It show shorted reading when you check it with analogue meter."

    Is it really possible to test small ceramic disc capacitor with analogue...
    03-09-2024, 10:03 PM
  • Loading...
  • No more items.
Working...