PS4 CUH 2216A (SAF 003) no picture on tv

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 1cvbnm
    New Member
    • Aug 2013
    • 6
    • j
    #1

    PS4 CUH 2216A (SAF 003) no picture on tv

    Hello, can someone with experience help me with the PS4 CUH 2216A (SAF 003). I bought a defective PS4 with the error "no picture on TV". After connecting several HDMI cables and changing the console to two TVs, there is still no picture. I disassembled the PS4 and noticed one for me on the motherboard a very confusing detail. IC GL3520 is used for the output to the HDMI connector, although the pictures of the motherboards that I have seen show the Panasonic MN864729. Please, someone explain to me what I am doing wrong. The IC GL3520 looks like it was soldered originally. I have attached a picture of the motherboard. Any help is welcome. Thank you.​
    Attached Files
    Tags: None
    • lotas
      Badcaps Legend
      • Jan 2016
      • 4656
      • Russia
      #2
      It is clear that the chip is not original and what kind of “master” soldered it there, he probably thought that if the case matches, then it will fit. What you have is the Genesys Logic GL3520 USB 3.0 Hub Controller Datasheet - a 4-port, energy-efficient and configurable hub controller.
      Should be MN864729 (Panasonic)
      Last edited by lotas; 04-13-2024, 05:31 AM.

        Comment

        • 1cvbnm
          New Member
          • Aug 2013
          • 6
          • j
          #3
          Thank you. You have confirmed my opinion. I am ordering MN864729 (Panasonic). Is there a service manual for this console?​

            Comment

            Previous template Next

            Related Topics

            Collapse
            • FZG
              Panasonic AG-1000B VHS player with bad picture quality
              by FZG
              Hello!

              I recently got an old VHS player from Panasonic and just for fun I want to try to repair this device. It is an AG-1000B portable VHS player from 1990 and it has a problem with picture quality in playback mode.

              Picture in playback mode is very noisy and often loses sync but the still images are nearly perfect.

              I want to know, is this something that could be solved by recapping or is the video head likely gone?

              Also, what mechanism is this?

              Any feedback is appreciated!...
              05-06-2024, 07:16 AM
            • Bazfletch3
              Panasonic TH-65FX800A backlight LED's working but picture is very dark
              by Bazfletch3
              Hi all

              While I have quite a decent background in electrical & electronic troubleshooting & repairs, this is my first time stripping down an LCD TV for repair.... I have inherited a 3yr old Panasonic LCD which has a picture, but it is quite dark (too dark to be watchable - but still quite easy to see; I didnt need a torch to see it).

              I started by checking and trying to adjust all of the picture and backlighting levels, but that made little to no difference. I also did a factory reset.

              From there I envisaged that the backlighting wasn't working, however...
              01-08-2024, 10:18 PM
            • Tr0ll
              T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
              by Tr0ll
              Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

              The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

              Original T-con:
              Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

              First replacement T-con:

              I thought it might be t-con and ordered new t-con from china(supposedly tested)...
              10-07-2023, 07:48 PM
            • JJAAMM
              SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
              by JJAAMM
              This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

              Problem
              TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
              07-06-2023, 06:01 AM
            • mar1in
              Panasonic TH-55AS670A no picture no sound
              by mar1in
              Hi everyone,

              I've got this Panasonic TV here with the following symptoms:

              * Standby Light is solid RED
              * Turning on using the Button on the TV (long press) would change LED to blinking GREEN
              * After a couple of seconds, LED is solid GREEN and without picture or sound.

              I've tried a couple of things before tearing it apart:

              * Resetting using various combinations of powerbutton and volume buttons pressing down while booting.
              * Activating Self Check according to service manual using IR Blaster (we have no remote unfortunately)...
              09-10-2023, 11:10 PM
            • Loading...
            • No more items.
            Working...