HP ProDesk 400 G6 Small Form Factor PC bios

[hardware1]

TEST OK, THANKS !

You're welcome.

[longtuoc]

Re: HP 400 G6 SFF Bios need



Here's your New bios file, try it and let me now the results.

Model Number: HP ProDesk 400 G6 SFF.
Serial Number: JPH943BYJF.

TEST OK, THANKS !

[arzammar]

Serial number ?

Serial No. CZC0298QZS
Product No. 9US27ES#ACB

[hoaca388]

HP ProDesk 400 G6 SFF needs a BIOS

Hello! There are 5 long and 7 short signals on this computer. I'm attaching the damaged bios. Please help me

Serial number ?

[arzammar]

HP ProDesk 400 G6 SFF needs a BIOS

Hello! There are 5 long and 7 short signals on this computer. I'm attaching the damaged bios. Please help me

[hoaca388]

GOOD AFTERNOON, I HOPE YOU ARE WELL. WHO CAN HELP ME PLEASE? I PRESSED THE CMOS BUTTON ON MY PC AND IT WON'T BOOT. THE LED LIGHT ONLY LIGHTS UP WHEN I PRESS THE POWER BUTTON, AND IT DOESN'T DO ANYTHING ELSE. I'VE BEEN INVESTIGATING AND IT'S A BIOS PROBLEM. IT'S CORRUPT. I NEED YOU TO PLEASE SHARE THE BIOS FOR MY PC WITH ME. I DELETED THE ORIGINAL BIOS AND I DON'T HAVE A BACKUP. I WOULD LIKE YOU TO SHARE THE ORIGINAL. THE ONES YOU'VE SHARED HERE HAVE NOT WORKED FOR ME.

HP ProDesk 400 G6 Small Form Factor PC

Serial: MXL0383S6K

Product: 7ZE28LA

Thank you for your collaboration. Thank you very much.

Next time don't delete bios even if it's corrupted.

[jeinercm13]

GOOD AFTERNOON, I HOPE YOU ARE WELL. WHO CAN HELP ME PLEASE? I PRESSED THE CMOS BUTTON ON MY PC AND IT WON'T BOOT. THE LED LIGHT ONLY LIGHTS UP WHEN I PRESS THE POWER BUTTON, AND IT DOESN'T DO ANYTHING ELSE. I'VE BEEN INVESTIGATING AND IT'S A BIOS PROBLEM. IT'S CORRUPT. I NEED YOU TO PLEASE SHARE THE BIOS FOR MY PC WITH ME. I DELETED THE ORIGINAL BIOS AND I DON'T HAVE A BACKUP. I WOULD LIKE YOU TO SHARE THE ORIGINAL. THE ONES YOU'VE SHARED HERE HAVE NOT WORKED FOR ME.

HP ProDesk 400 G6 Small Form Factor PC

Serial: MXL0383S6K

Product: 7ZE28LA

Thank you for your collaboration. Thank you very much.

[mobisota61]

Thanks for the reply! But unfortunately, the computer won't start. Still, 5 and 7 beeps. There it possible with hardware trouble...

The chip SRH1A died... Thank you for help

[mobisota61]

HP ProDesk 400 G6 Desktop Mini PC

Thanks for the reply! But unfortunately, the computer won't start. Still, 5 and 7 beeps. There it possible with hardware trouble...

[hoaca388]

Please excuse me, but another HP Prodesk 400 G6 won't boot also.
It happened after a severe thunderstorm and lightning strike.
The symptoms are as follows - 5 long red beeps and 7 short white beeps. As I understand it, this means that the firmware of the BIOS chip is faulty.
If possible, please help me restore the firmware.
Thank you so much!

Serial 8CC10316S6

Product 1C6Z1EA#ACB

HP ProDesk 400 G6 Desktop Mini PC

[mobisota61]

hoaca388 !

Please excuse me, but another HP Prodesk 400 G6 won't boot also.
It happened after a severe thunderstorm and lightning strike.
The symptoms are as follows - 5 long red beeps and 7 short white beeps. As I understand it, this means that the firmware of the BIOS chip is faulty.
If possible, please help me restore the firmware.
Thank you so much!

Serial 8CC10316S6

Product 1C6Z1EA#ACB

[mobisota61]

HP ProDesk 400 G6 Desktop Mini PC

That's great!!! I can't believe it! The computer turned on, some time waiting and the HP screensaver appears on the screen.
How did you do it?
Thank you very much, hoaca388 !

[hoaca388]

Good afternoon!

During the bios firmware update, the computer turned off and now does not turn on. The bios firmware is damaged. Can you help fix the firmware? Thank you.

HP ProDesk 400 G6 Desktop Mini PC

[mobisota61]

Good afternoon!

During the bios firmware update, the computer turned off and now does not turn on. The bios firmware is damaged. Could you help me fix the firmware? Thank you.

Serial 8CC0471KRJ
Product 1C6Z1EA#ACB

[JITESH MOORPANI]

Hello need help, I am looking for the bios of the HP ProDesk 400 G6 Small Form Factor PC
SR NO:-MXL943629B
PRODUCT NO:- 6EF24AV

[SultanPindakaas]

Oke done that now. But now i keep getting this error…

[kt1998]

Oke i found a way to connect, i also hear windows making a sound that something has been connected, but it wont read it.... any clues?

It's seem to be you are using the wrong 16 to 8sop clip
16 to 8 pin only use 8 pin from 8 header corners pin of the chip
you can modify the one you have or buy the right one
the correct trace is on the clam pcb there is place to solder 16 pin chip follow the trace under pcb to match which pin of 16 connect to 8 pin
when you connect ch431a to computer i recommend you should plug directly instead of external cable
use the ch341a programming software to detect the chip

[SultanPindakaas]

Oke i found a way to connect, i also hear windows making a sound that something has been connected, but it wont read it.... any clues?

[SultanPindakaas]

What am i doing wrong? It just wont detect..

[SultanPindakaas]

Thank you for the information.