Graphics card Schematics and Boardviews

[itsashort]

Solved Re: Graphics card Schematics and Boardviews

Hello All, I'm after a boardview , schematic for

Asus ROG STRIX RX580 8G GAMING

D000 PIL REV. 1.00X

Thanks

Solved:

Problem traced to

U100

74AUP1G57GM

[Byjac]

Re: Graphics card Schematics and Boardviews

Does anyone have board view or schematic for geforce 8800 gtx or 8800 gts?
Old cards.yes,but missing few small SMDs on them.
Tnx for any help

[mumifix]

Re: Graphics card Schematics and Boardviews

someone have schematic for evga gtx 580. missing one smd at c853 on the board

[itsashort]

Re: Graphics card Schematics and Boardviews

Anyone have powercolor red devil rx480 8gb schematic / boardview.

Thanks

[draak]

Re: Graphics card Schematics and Boardviews

Looking for boardview software that can see were tracers running

[sk3690]

Re: Graphics card Schematics and Boardviews

Thank You So Much.

[sk3690]

Re: Graphics card Schematics and Boardviews

Thank You so much.

[ATS-Byron]

Re: Graphics card Schematics and Boardviews

Hello All,

I am looking for the boardview for the GIGABYTE GeForce RTX 3080 Ti VISION OC 12GB.

If anyone has one that would be awesome.

I have two cards, both will have the fans spin up but no display and would like to fix them.

Byron

[computeka]

Re: Graphics card Schematics and Boardviews

Hello All,

I am looking for the boardview for the GIGABYTE GV-N1650OC-4GD

[elemet]

Re: Graphics card Schematics and Boardviews

hello friends, please I need the diagrams of the gtx 960 ssc 2gb evga and the rx 560 v.2 gigabyte, they would really help me a lot they are my personal equipment

[ostryo]

Re: Graphics card Schematics and Boardviews

Hello, Does anyone have a boardview for the MSI R7 370 Gaming? (MS-V305)

[ronnygracias]

Re: Graphics card Schematics and Boardviews

hello friends, does anyone have the boardview for evga rtx 2070 08g-p4-1071? I'm looking for the component that is missing, it would be helpful of someone could tell me what that part is, i would really appreciate it.
Thanks

[bennedick2]

Re: Graphics card Schematics and Boardviews

Thank you so much for this, good for new Learning graphics card repair!

[rogeriodias.rcd@gmail.com]

Re: Graphics card Schematics and Boardviews

Hi, anybody have a schematic or/and boardview of ASUS GTX 970 OC TURBO 4GB (TURBO-GTX970-OC-4GD5) ???

[blghn]

Re: Graphics card Schematics and Boardviews

i need schematic of 2 card
1. rtx 3060ti gigabyte gaming oc
2. inno3d gtx 1660ti twin x2 oc

[andrhram]

Re: Graphics card Schematics and Boardviews

у кого нибудь есть boardview gv-n650oc-2gi rev:1.0

[Tom56]

Re: Graphics card Schematics and Boardviews

Hello,
i share my full set of schématics and boardviews:

https://mega.nz/file/Log02CTS#-J8kd6...298eai2Vxm9qZ8

Thank you mate it was a big help.

[alphaquete]

Re: Graphics card Schematics and Boardviews

Hi to all Friends, GPU ASUS DUAL-GTX 1660 Ti-O6G CG161PI
Schematics (pdf) and Boardview (html)

Thanks!!

[blghn]

Re: Graphics card Schematics and Boardviews

hi i need 1660ti inno3d twin x2 oc schematic and boardview

[babadoos]

Re: Graphics card Schematics and Boardviews

Hello All,

I am looking for the boardview for the GIGABYTE GeForce RTX 3080 Ti VISION OC 12GB.

If anyone has one that would be awesome.

I have two cards, both will have the fans spin up but no display and would like to fix them.

Byron

Hi Byron, these cards have a tendency to sag and create a small crack at the shoe of the pci express release tab. If you look closely and you see this on either side of the card, I would prepare yourself for a very difficult/impossible even journey.

There are many traces that are buried between the multiple layers of the pcb, from 12v power traces to multiple data/signal on comm traces. There are 14 layers in total and with a good enough sized crack you may need to attack several layers and grind into them to repair all broken traces. Most
People cannot handle this work but with the right tools and enough patience anything is possible unfortunately can't help with a schematic for that board. Just thought I would spare you some major pain