Ecs h1104-sf100

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • leandrinux
    New Member
    • May 2020
    • 2
    • Argentina

    #1

    Ecs h1104-sf100

    Hello everyone!

    In case you have it, would you please upload the full EEPROM content for this motherboard? It should be 8,388,608 bytes long. I've found BIOS updates in ECS website but they are only 6MB in size. Any help is greatly appreciated!
  • peste
    Super Moderator
    • Dec 2016
    • 12290
    • ROMANIA

    #2
    Re: Ecs h1104-sf100

    post the original bios
    Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

    >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

    Every donation made will go towards server fees and maintenance costs.

    Comment

    Related Topics

    Collapse

    • warsztat
      Kettler M-9816, I am looking for serial eeprom content.
      by warsztat
      Hello, Kettler training device, no resistance control, incorrect speed indication. The error is in the control panel, I am looking for the contents of the serial eeprom memory indicated in the photo.
      24LC04B. The memory contains the device configuration.​...
      01-17-2025, 11:21 AM
    • SidneyCanadas
      93C46 and 93C56 EEPROM
      by SidneyCanadas
      I tore apart my instrument cluster for my 2008 Toyota Corolla made in 2007 in Cambridge, Ontario, Canada and pcb location: IC6=EEPROM is a surface mounted device with part # of 93C46W7, some claim the EEPROM out of a Camry part # 93C56 will allow odometer to roll over 299 999 KM or miles. The data sheet for both is below:

      https://cdn.badcaps-static.com/pdfs/...c6e42b20d3.pdf 2

      Anyone know if the Camry one will work on my Corolla?. And which EEPROM reader/writers do you all recommend I purchase that will allow me to read the old values of the old...
      06-14-2023, 01:16 PM
    • dmccul2698
      Pioneer DEX-P99rs "No EEProm " diagnostic code.
      by dmccul2698
      Hello, My head unit developed strange behaviors so I ran the built-in diagnostic package which returned "No EEProm". The service manual says there is no EEProm connected. I approached Pioneer and they said to swap out the DSP board. All said and good but the DSP board is $860 USD. I am hoping someone can help me

      1). Understand the schematic and check the connections between the EEProm and DSP
      2). Check the functionality of the EEProm

      I don't know if this is the unit's problem but it's a place to start.

      I have little to no electronic experience...
      04-08-2024, 05:32 PM
    • edgarmg15
      Damaged EEPROM on TV Vizio E320-A0
      by edgarmg15
      Hi everyone

      I´m trying to repair a TV Vizio E320-A0 that I found in the street

      The symptoms are it doesn't respond with remote or buttons, the LED indicator is always off and also there is no image on the TV.

      The power supply board works fine (I probed the terminals with my multimeter) but in the main board the EEPROM doesn't works correctly because the voltage on the pins doesn't match with the parameters of the datasheet.

      So, I´m going to replace the EEPROM with a new one, but the problem is that my programmer (CH341a)...
      11-19-2022, 03:46 PM
    • acedogblast
      Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
      by acedogblast
      This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

      There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
      11-02-2024, 05:13 PM
    • Loading...
    • No more items.
    Working...