Hi everyone, My BIOS chip is dead and I need to replace it. I need a full 16MB BIOS dump to write to a new Winbond chip. Board: ASRock H470 Phantom Gaming 4 Revision: 1.00 Flash IC: Winbond 16MB Thank you very much!
-
-
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptions
-
Hello everyone,
I’m looking for a full raw 16 MB (128 Mbit) SPI BIOS dump for an ASRock Z590-C/ac motherboard.
Issue / symptoms:
The board powers on (fans spin, USB devices get power), but there is no POST, no display output, and no beep codes, even with a speaker connected and RAM fully removed.
What happened:
I attempted recovery using a CH341A external SPI programmer after a failed BIOS update. I flashed the official ASRock BIOS v1.30 file directly to the chip. I later learned this file is intended for Instant Flash only and is not a complete... -
I replaced xdpe controler, bought it already programed, but gpu still doesnt work everything seems fine all voltages are present, all pwrgood are 3.3v gpu persr is 3.3v but the card isnt recognised by motherboard and no video output. gpu and vram is hesatng sligthly, drmos are heating(besides 2 vcore propably normal but idk). I dont know what to do now. Maybe it is the xdpe config? Thanks for any advice or dump.(sorry for my bad English) -
Hello everyone,
I’m looking for a full raw 16 MB BIOS dump for an ASRock Z790-CX (DDR5) motherboard.
The board powers on (fans spin, RGB lights on, RAM LEDs active), but there is no display output and the VGA and BOOT LEDs stay lit.
I’m using an Intel i9-14900KF CPU (14th gen), and it seems the BIOS version on my board doesn’t support it yet. I tried to flash the official ASRock BIOS file (renamed .ROM → .BIN) directly using my RT809H programmer, but it didn’t work — monitor stays on but with black screen, so I believe the ASRock update file is not a complete... -
Hello everyone,
I'm trying to recover a ASUS Zenbook Pro 15 Flip OLED (model UP6502ZA, serial R1N0CV06A262028, motherboard 60NB0W20-MB1030) which stopped booting after a Windows 11 update. The laptop powers on but there's no display and no POST.
I have a CH341A v1.612 programmer with a WSON 6x5mm pogo adapter. I managed to get two identical consecutive reads, so I believe my corrupted dump is "reliable".
I've spent the last few days trying to prepare a flashable image from the official ASUS bios file (UP6502ZAAS.312, 19MB) downloaded from their... -
Hello everyone,
I'm looking for a clean 16MB BIOS dump for the following laptop:
Model: HP Pavilion 17-cp2046nf Motherboard Board ID: 8A81 Motherboard codename: Eunice 22C2 CPU: AMD Ryzen (17-cp2 series – Barcelo-R / Rembrandt-R) BIOS chip: 16MB (SPI Flash – Winbond / GigaDevice, to be confirmed)
Symptom / reason for request: Laptop won't POST after failed BIOS update / black screen.
I already tried HP's official BIOS recovery (USB key method) without success.
I have a CH341A programmer and clip, so I can flash directly on the chip. I just need a virgin/clean...
Comment