Try our new boardview, bios, & schematic search. Over 1.3 million files for download!

Imac A1418 Clean Me

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • platinumsteel
    Badcaps Veteran
    • May 2019
    • 245
    • Trinidad&Tobago
    • pc and labtop repair
    #1

    Imac A1418 Clean Me

    Hi guys hope u all doing fine . I was hoping you can help me out to repair my bios with maybe a clean me region .The Imac chimes but i get no post or picture.
    imac A1418
    Serial D25K70EXDNCT EMC: 2544
    Model: Imac 21.5 '' A1418 MD094LL/A
    Board Model: 820-3302 EMMC: A1418
    Attached Files

    Premium supporters get full download access and other benefits.

    Tags: None
    • hoaca388
      Badcaps
      • Jan 2022
      • 12717
      • Socialist Republic of Vietnam
      #2
      Originally posted by platinumsteel
      Hi guys hope u all doing fine . I was hoping you can help me out to repair my bios with maybe a clean me region .The Imac chimes but i get no post or picture.
      imac A1418
      Serial D25K70EXDNCT EMC: 2544
      Model: Imac 21.5 '' A1418 MD094LL/A
      Board Model: 820-3302 EMMC: A1418
      iMac A1418,
      Số seri D25K70EXDNCT, EMC: 2544,
      Model: iMac 21.5'' A1418 MD094LL/A,
      Model bo mạch: 820-3302, EMMC: A1418
      Attached Files

      Premium supporters get full download access and other benefits.

      If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our bios, boardview & schematic archive.

      Subscribe to support us. It only takes 1 minute:
      https://www.badcaps.net/settings/subscriptions

        Comment

        • platinumsteel
          Badcaps Veteran
          • May 2019
          • 245
          • Trinidad&Tobago
          • pc and labtop repair
          #3
          100% working fine my friend . thanks a lot

            Comment

            Previous template Next

            Related Topics

            Collapse
            • ryogadan78
              iMac A1418 - No LED, no power after overvoltage on Ethernet port
              by ryogadan78
              Hi guys, I need your help again.
              I have this iMac from a customer that shut down during a storm along with all the other devices in the house. In particular, the router, connected via Ethernet to the iMac, caught fire.
              When I removed the screen from the iMac to check the status of the LEDs, I noticed that none of them were lit. I had a perfectly compatible and working power supply, so I tried it right away, but the problem remained the same (no LEDs). With the thermal camera, I noticed only a slight warming (32 degrees) of the NCP1605BG chip on the power supply. The rest was completely...
              06-10-2025, 03:49 AM
            • Boardview and Schematic Bot
              Apple iMac A1418 21.5" Logic Board 820-3172 820-3172-A Schematic
              by Boardview and Schematic Bot
              Apple iMac A1418 21.5" Logic Board 820-3172 820-3172-A Schematic...
              02-12-2026, 05:44 AM
            • Konner
              Sony XBR-55X900F EMMC Repair
              by Konner
              Hello, I picked up a free broken Sony XBR-55X900F. Motherboard number 1-983-249-31. I figured it would be a fun project to fix. When I plugged this TV in it was completely dead and had no power light. I followed this guide to help me diagnose the problem https://www.youtube.com/watch?v=4afrEbS5mZw. I have quite a bit of experience fixing other electronics, but not much with repairing TVs. I initially thought it was going to be a dead power supply, however after quite a bit of digging I suspect that the emmc is likely corrupted. I had 1.8v and 3.3v going to the emmc. With the motherboard removed...
              01-11-2026, 01:14 PM
            • roman728
              iMAC A1418 Backlight issue
              by roman728
              Hello friends,

              I have this unit with no backlight on screen. After inspection i determined there is a shorted capacitor on BKL_BOOST circuit. I removed the capacitor, short is gone but backlight still not working. I found that Q9702 is not open and R9721 is only around 70kOhms but according to schematics it should be 301k. I removed the resistor and connected the gate of Q9702 directly to GND. Now i have 12v passing by the mosfet to turn on backlight IC LP8561 (U9700) but BKL_BOOST circuit is not working. I can measure only 12V there but it should be around 60V.

              Can you...
              04-10-2025, 11:48 AM
            • EazyBone
              Hisense 55H8F Emmc programming help
              by EazyBone
              I am extremely new to programming and dipping into this. I picked up a XGECU T48 Programmer and have the correct socket for EMMC.
              I took the EMMC off a working main board with no problems and threw it into the programmer. I click analysis IC and it gives me a report (attached) of the current EMMC. Model H26M41204HPR

              1) I manually found this chip(above model number) in the select IC section of the XGPRO 12.xx programmer software and it had a option for 4 bit and 1 bit. I chose 4... is this correct?

              2) In the options section point number 2 operation says "30...
              5 Photos
              06-11-2024, 06:03 PM
            • Loading...
            • No more items.
            Working...