Lenovo 330s-ARR-R332200U motherboard remove on board ram

[laup]

ive looked through all the lines for 2311 but cant see a consistant row of them

could someone please have a look at my bios and remove the onboard from within, appreciate it

330s-ARR-R332200U motherboard

Laptop : Lenovo 330s 15 ARR
motherboard: 330s-ARR-R332200
SN: yd04qytm

[SMDFlea]

ive looked through all the lines for 2311 but cant see a consistant row of them

could someone please have a look at my bios and remove the onboard from within, appreciate it

330s-ARR-R332200U motherboard

Type the laptop serial number, full name and model, motherboard model, etc.
read the forum rules..https://www.badcaps.net/forum/troubl...before-posting

[laup]

Type the laptop serial number, full name and model, motherboard model, etc.
read the forum rules..https://www.badcaps.net/forum/troubl...before-posting

sure

[SMDFlea]

sure

You can remove the SPD with a macro script - https://www.badcaps.net/forum/troubl...20#post3232220
Alternatively ,search the internet for SPD removal tool and use that, it does the same thing.

I doubt it will work though as the SPD is in the EC firmware.

APCB (AGESA PSP Configuration Blob)
Coreboot info https://doc.coreboot.org/soc/amd/family17h.html
APCBs are used to provide the PSP with SPD information and optionally a set of GPIOs to use for selecting which SPD to load.

[laup]

You can remove the SPD with a macro script - https://www.badcaps.net/forum/troubl...20#post3232220
Alternatively ,search the internet for SPD removal tool and use that, it does the same thing.

I doubt it will work though as the SPD is in the EC firmware.

APCB (AGESA PSP Configuration Blob)
Coreboot info https://doc.coreboot.org/soc/amd/family17h.html
APCBs are used to provide the PSP with SPD information and optionally a set of GPIOs to use for selecting which SPD to load.

Appreciate it, i will give it a go tomorrow, didnt know this existed, ive only done onboard ram mods via resistors in the past, but there doesnt seem to be a full schematic for this board available

[laup]

I will try and see , if not i will then see if i can read super io via svod and possibly run the script?