ASRock 9070XT Steel Legend Schematic Request
Currently working on my ASRock 9070xt Steel Legend, and would greatly appreciate a schematic for it!
-
Collection of Laptop Motherboard Schematic and Boardviews
List of Pack :
01- Acer Aspire 3 A315-23G Quanta Z8E (DA0Z8EMB8C0) Schematic & Boardview
02- Acer Aspire 3 A315-33 DH5JL Compal LA-F943P r1.0 Schematic
03- Acer Aspire 5 A515-52K Compal LA-H441P Schematic
04- Acer Chromebook Spin 311 CP311-2H ZBA ZBB DA0ZBAMB6A0 Schematic
05- Acer Chromebook Spin 311 CP311-3H ZDE DA0ZDEMB8B0 Schematic
06- Acer ConceptD 9 CN917-71 Compal FH79F LA-G162P Schematic
07- Acer Spin 3 SP314-53GN Pegatron DL4FA Dolly Schematic
08- Acer Swift 3 SF315-41G...02-18-2026, 01:06 AM -
Hi, I’m looking for a clean, working BIOS .bin dump (16MB) for the ASRock B450M Steel Legend motherboard.
I’ve already tried flashing the official ASRock ROM file via CH341A, but it won’t post — I believe the capsule format is incompatible.
Any BIOS version that supports Ryzen 5 2600 is fine (e.g., P2.30–P3.60).
If anyone has a working board and can dump the BIOS using CH341A or flashrom, I would really appreciate your help.
Thank you! -
I need of Asrock B450m Steel Legends schematic motherboard, i thank you who can make it available to me! -
Hello, could you help me with the boardview of an ASrock X670E Steel Legend? I have a project to assemble a PC from scrap parts. My last purchase was this motherboard and I want to try to repair it as much as possible. Any help is acceptable and welcome. Always grateful for the help Greetings -
I've got an ASRock B450 Steel Legend that I'm trying to diagnose for no reaction to the power button.
The SIO receives the PWRBTN# signal and sends PSOUT#, but the CPU doesn't return SLP_S3# so nothing further happens. I have been looking around the board trying to figure out why and I happened to touch the STEP-DOWN CONVERTER NB685GQ-Z (UP10 in photo) which was VERY hot (like burn your finger). This seems to provide VDDP_S5, and indirectly, VDDCR_SOC_S5, which the CPU needs in order to handle the startup signals.
The VCC voltage powering the converter does not look right....