can you share the dump ....
-
XGpro parameters?
Hi everyone.
I have dumped a bios from a motherboard. The chip is a GD25B128E@SOIC8 and the T48 reconnised it without problem
I have dumped the bios, modded it and burn back.... Computer screen is not lighting up anymore.... I tried to burn the original img but it's the same problem...
There are some options in XGpro i don't know what they are for??? Can you please tell me what they are for and if i have to use them
In reading mode, I have this:
Do i Have to change "To region(buffer)" parameters?
DO i have to "clear buffer" ?
also, on "Write mode" i have this
What is "OTP Secu R" for? do I have to use it?
I fact i don't understand where i miss something... why if i burn the same IMG (orignal one) it still doesn"t boot like before ?
Many thanks
-
Greetings everyone,
I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...
The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.
Upon closer inspection... -
Eventually discovered a burn mark near lower corner of LCD. Here is a summary- Backlight on, no image
- Disconnect right buffer board (view from front), left side display comes on
- Masked off pin 7+8 (both ~12,5v on both left and right buffer board) from t-con to right buffer board (view from front) display works but have some lines
- Buffer board is pretty simple
07-11-2025, 04:04 PM -
I need a dumped firmware for Intel DQ35MP motherboard after its firmware got corrupt in a bios update. I need the dumped firmware to be in .bin format and have 4MB in size, since the chip is 32Mb in size. -
I have an AOC U27G3X 4K gaming monitor that I use both as a TV and for gaming on a Nintendo Switch 2 console. Recently, something very strange has been happening to it. After playing a game that has an on-screen timer for a few minutes, the last digit of the timer (the one rapidly flickering from 0 to 9) appears to burn in on the monitor. Going to a different source or power cycling the monitor does not help; there is a constant flickering area on the screen where that digit was.
It seems strange that only that digit would burn in, and NOT the other digits that are changing less frequently.... -
Hi,
I got a Lenovo Thinkcentre M75n (MT-M 11G5 PF3XG5V3) with a semi-bricked bios.
Short recap: I want to add an external GPU via the M.2 slot (Oculink). It does work but has some problems with the onboard GPU of the Ryzen 3 3300U. So I used Smokeless_UMAF to disable it. Since then I don't get any video via the external GPU nor the iGPU and Can't access the BIOS, but the PC does boot to the OS.
I desoldered the flash IC MX25U12872F and dumped the flash.
I also downloaded the newest BIOS and have it as a .bin file (I loosely compared the contents...08-04-2025, 07:46 AM
Leave a comment: