-
Hello,
I am working on an HP ProDesk 600 G4 Small Form Factor PC.
Current state:
No video
No beep codes
Continuous reboot loop
Available:
Main BIOS dump
Board serial number (can provide)
External SPI programmer
Looking for:
Help rebuilding a working BIOS image for HP ProDesk 600 G4 SFF
Correct EC / Security Controller firmware
I can upload BIOS dump and board photos if needed.
SN CZC844747G
Thank you.Leave a comment:
-
Thanks for your reply. A community member shared the BIOS file with me, but now I’m facing a new issue while writing it. I’m using a CH341A black programmer (with ASProgrammer). I can read the chip multiple times without any problem, but when I try to write, it becomes extremely slow (green progress bar) at the beginning. I had to stop the operation because it looked like it would take many hours. Now the writing process doesn’t start at all, and I don’t see any error messages either. BIOS backup file is attached
Leave a comment:
-
-
Hello,
I am requesting help with BIOS recovery for the following system:
Model: HP ProDesk 600 G4 Small Form Factor (SFF)
Platform / BIOS family: Q07
Product Number: 2VG42AV
Serial Number: INA917R9JV
Motherboard: HP ProDesk 600 G4 SFF
Problem description:
The system is dead / no POST.
No display, no HP logo, and BIOS recovery is not working.
Request:
I am looking for a known-good FULL 32MB SPI BIOS dump for HP ProDesk 600 G4 SFF (Q07),
suitable for external reprogramming with a CH341A programmer.
If someone can share a compatible BIOS dump or confirm which existing file is correct for my serial / board revision, I would really appreciate the help.
Thank you for your time and support.Leave a comment:
-
Hi every one and thank you in advance.
I have HP ProDesk 600g4 pc.
I need your help to repair bios.
This is my old dump. SN: 8CC840084GLeave a comment:
-
Hi, could you help me fix this error in the BIOS? If I press "OK," it reboots and the error reappears. I've tried several files, but it won't boot with just the originals..
HP ProDesk 600 G4 SFF
SN 8CC9493Z18Attached FilesPremium supporters get full download access and other benefits.
Leave a comment:
-
-
-
Here is the actual video for the status of PC
Light blinking and fan spinning on &off synchronizing with white light, No display
https://youtube.com/shorts/DAx3Fs7IYX8?feature=share
Leave a comment:
-
I have HP ProDesk 600g4 sff pc. Need help to repair bios.
This is my old dump. SN: CZC9137NZ1
ThanksLeave a comment:
-
-
Need Clean BIOS/EC Bin File for Lenovo ThinkPad Yoga 11e - Stuck with 0275 Error CMS
Hello everyone,
I am attempting a repair on a Lenovo ThinkPad Yoga 11e that is currently stuck at boot with the error: "0275 error CMS" even after setup new bios battery and will not allow me to enter the BIOS/Setup.
This is a critical issue that I believe requires flashing the BIOS chip directly using a programmer (e.g., CH341A/RT809H), as standard software updates or resets are not possible.
I have opened the laptop and identified the main BIOS chip... -
Hello Everyone,
I have HUAWEI MateBook X Pro 2019 (MACH-WX9) whose BIOS got corrupted i beleive. I have acquired Ch341A SPI flasher to program the BIOS externally. I see that to program the BIOS, i need BIOS bin/hex file which i could use to reflash it externally via the flasher tool.
It seems like the support page of this model no longer exist: https://consumer.huawei.com/be/lapto...ro-2019/specs/
In the website, you can only see specs etc.
I have not tried to extract the BIOS dump yet as I want to see if there is any ray of sunshine... -
Hello,
I need a BIOS dump for HP ProDesk 600 G4 Desktop Mini.
Machine details:
- Model: HP ProDesk 600 G4 IDS Desktop Mini
- P/N: 2YE28AV#ABE
- Motherboard: DA0F81MB6H0 REV:A
- CPU: Intel Core i5 8th gen
- BIOS chip 32MB: Winbond W25Q256JVSQ (SOIC16)
- EC chip 16MB: Winbond W25Q128JVSQ (SOIC8)
Symptoms:
- Black screen, no POST
- 6 red + 3 white beeps
- Fan spins full speed then stops
What I already did:
- Dumped both chips with CH341A
- 16MB EC chip was almost empty (99% FF) →... -
Hi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R... -
Hello, everyone!
I've got an HP ProDesk 600 G5 Desktop Mini with an i5-9600T with vPro / AMT. I updated its BIOS one day via the UEFI interface (not in Windows) and I presume the update failed. The PC would sit with its power LED on solid white, no output. Unpacking the BIOS provided by HP to a USB and booting with Windows-V or Windows-B pressed didn't help with anything.
Therefore, I got a CH341A flasher. The PC has a 16MB BIOS (GD25B127DSIG) and a 32MB EC chip (GD25B256DFIG).
I saved my initial bricked 16MB BIOS (attached ) and tried flashing one I found...
Leave a comment: