Dell optiplex 3080 micro password

[SMDFlea]

Post moved from SFF topic to micro.

[aap71321]

i need help unlocking Dell Optiplex 3080 Micro MASTER PASSWORD....

Service Tag# JYFH63-8FC8

I have no idea how to get the bios bin file you need please help me...

THANKS IN ADVANCE

[hoaca388]

optiflex 3080 micro

help me dump this bios bin
heres the file thanks
company lock issue

SERVICE TAG: 3LSOXG3

SERVICE TAG: 3LSOXG3

[papikit]

optiflex 3080 micro

help me dump this bios bin
heres the file thanks
company lock issue

SERVICE TAG: 3LSOXG3

[deepfreak]

Hello Together,

I need help removing bios password and absolute/computrace for OptiPlex 3080 Micro.

It's the first time I created a bios dump with a programmer, so I'm not quite sure if everything went well.

I've used a Raspberry Pi with flashrom software.

Can you please check if the dump is valid and do the necessary?

Thank you very much in advance.

Service Tag: H5WT393

[hoaca388]

Dell Optiplex 3080 micro
Model: D14u
service tag: 6CHPTC3

Hello; I made a pch change, can you do a clean me? The files I have are not working.

Dell Optiplex 3080 micro

[zedxx7]

Dell Optiplex 3080 micro
Model: D14u
service tag: 6CHPTC3

Hello; I made a pch change, can you do a clean me? The files I have are not working.

Choose W25Q256 ,untick verify if there`s an option.

I don't need any more help, I managed to remove the password and thank you SMDFlea for your help.

I reused Rex98_8FC8_Patcher with the new bin file and I don't have any more errors. I would like your opinion on disabling the password before soldering the chip to my motherboard so that I don't have to do it multiple times to avoid damaging it. Has the password been deleted or is it still there? You will find the patched bin file attached.
Noa

Choose W25Q256 ,untick verify if there`s an option.

I think I succeeded! Thank you for your help! And is it possible to remove the BIOS password?

Choose W25Q256 ,untick verify if there`s an option.

I didn't quite understand, I have to choose the W25Q256 chip and untick what? I have attached to my photos many parameters that I can enter for the W25Q256 chip. I also spotted the chips in the second photo but I don't think they are useful. On the other hand, I don't know what values I need to modify to correctly read the data from the chip?
Thank you for your help,
Noa

[SMDFlea]

Thank you for your response. I'm going to try lowering the speed to 6Mhz but I think that's what I already did. The Auto-detect function chose W25X10 as the chip and it is not the correct one. I am attaching to my message the other chips available on the software, but none are called 25Q256JVFQ. The closest one seems to be the W25Q256 but I don't know if it will work.

Choose W25Q256 ,untick verify if there`s an option.

The backup isn`t good, its only 128KB uncompressed and 98KB compressed. Slow the programmer speed down to 6Mhz and try again. Is the chip in the support list, choose it manually, the Auto-detect doesn`t work very well.

Thank you for your response. I'm going to try lowering the speed to 6Mhz but I think that's what I already did. The Auto-detect function chose W25X10 as the chip and it is not the correct one. I am attaching to my message the other chips available on the software, but none are called 25Q256JVFQ. The closest one seems to be the W25Q256 but I don't know if it will work.

[SMDFlea]

Thank you for answering me and here is the service tag: 4PK7L83
I attached the bin file compressed in zip as you asked me.
Noa

The backup isn`t good, its only 128KB uncompressed and 98KB compressed. Slow the programmer speed down to 6Mhz and try again. Is the chip in the support list, choose it manually, the Auto-detect doesn`t work very well.

Attach files directly to your post in a zip or rar. Add the PC service tag to your post as well ,please Type it.

Thank you for answering me and here is the service tag: 4PK7L83
I attached the bin file compressed in zip as you asked me.
Noa

[SMDFlea]

Thread merged.

[SMDFlea]

And I don't know why I'm not allowed to add a bin file to my message so I put it for you on Google Drive: **********************

Attach files directly to your post in a zip or rar. Add the PC service tag to your post as well ,please Type it.

Hello,
This is the first time I write on this forum because this time, I really need help. I got a DELL OptiPlex 3080 Micro but when I wanted to access the bios to install Debian 12, I realized that it was secured with a password. I tried everything I could. I used the passwords generated using the suffix code but it didn't work. I then purchased the EZP2023+ programmer and unsoldered the BIOS chip from the motherboard. I read it and then got a bin file. I watched many tutorials on YouTube to unlock it but it required either paid software or searching for hexadecimal values which were not present in my bin file. I also used Rex98_8FC8_Patcher but it didn't work and I'm attaching the screenshot of the error. So I would like to know if you could unlock the BIOS of my computer or explain to me how to proceed to unlock it? I am attaching to my message everything that seems useful to me for unlocking the bios.
Thank you!
Noa

And I don't know why I'm not allowed to add a bin file to my message so I put it for you on Google Drive: **********************

[niknintendo]

Need unlock. Thanks!
Dell Optiplex 3080 micro
Model: D14u
Reg type: D14U002
DP/N on motherboard: OHGFJM CN-OHGFJM-WS200-21H-0039-A00
DP/N: WCFMW A00
service tag: DHJ01H3

[dlhnetworks]

Hello! I have realized that I still have warranty left. Does calling deel solve the problem? They gave me this equipment and I don't know if they can help me. Thank you!!!