I have a Gigabyte RTX 3060 Ti Gaming OC Pro 8G Rev. 3.0 which crashes when i install a driver. I tried DDU and different drivers (also did nvcleanstall) but to no avail. I was pretty sure it was a vram issue so i tried mats (version 455.127). To my surprise it passed the test. I ran it again and got the same result.
The next thing i did was flashing the vbios from version 94.04.6B.00.AA to version 94.04.46.40.A7. This made things slightly worse (flashing at boot, resolution issues). It gave a black screen when i installed a driver. I tried mats again and the result was 'fail' (2x).
=== MEMORY ERRORS BY SUBPARTITION ===
SUBPART READ ERRORS WRITE ERRORS UNKNOWN ERRS
FBIOB1 0 1320704 0
FBIOC0 0 1316736 0
I thought this was very weird. Why 'pass' on vbios 1 and 'fail on vbios 2 for the same card?
Next i reflashed the vbios to the original version. Mats gave it a 'pass'. I'm not sure what i should do at this point. My instinct tells me to replace banks B1 and C0, but i would like your advise about this mats issue first.
The next thing i did was flashing the vbios from version 94.04.6B.00.AA to version 94.04.46.40.A7. This made things slightly worse (flashing at boot, resolution issues). It gave a black screen when i installed a driver. I tried mats again and the result was 'fail' (2x).
=== MEMORY ERRORS BY SUBPARTITION ===
SUBPART READ ERRORS WRITE ERRORS UNKNOWN ERRS
FBIOB1 0 1320704 0
FBIOC0 0 1316736 0
I thought this was very weird. Why 'pass' on vbios 1 and 'fail on vbios 2 for the same card?
Next i reflashed the vbios to the original version. Mats gave it a 'pass'. I'm not sure what i should do at this point. My instinct tells me to replace banks B1 and C0, but i would like your advise about this mats issue first.
