Can someone tell where to find the version number? This board will not bootup so no way to see any info on screen. Have the manual which came with this board when I bought it (in the box )way back when. On the first page it has version 5.0 G52-MA00433 written on it.Does this help? And yes a visual inspection of the caps ( 21 of them ) results was (1) bulged with sticky residue on top ( G-Luxon 2700uf 6.3v ) a known problem cap brand
-
-
Re: MSI K7T Turbo2
you mean the board version number?
it should be written on the board
why do you need to know this? just recap it -
Re: MSI K7T Turbo2
Yes the board version ,for proper identification purposes. I've check cap kits listed for this board which list different amounts of caps.This board has 21 caps on it,just want to make sure before I order new ones and which ones should I replace ,G-Luxon,Teapo,or all of them since i've got the board out already.Sorry for being so uninformative about this in advanceComment
-
Re: MSI K7T Turbo2
tell me the caps above 330uf and the brands and i can tell you what to replaceComment
-
Re: MSI K7T Turbo2
(2)G-Luxon 2700uf 6.3v 10mm dia.
(2)G-Luxon 2200uf 6.3v 10mm dia.
(2)G-Luxon 470uf 16v 8mm dia.
(7)Teapo 1000uf 6.3v 8mm dia.
(4)kzg ? 1500uf 16v 10mm dia. brown colored wrapping
(4)kze ? 4700uf 6.3v 12.5mm dia. green colored wrapping
The last ones (kzg & kze) is the only other markings.Comment
-
Re: MSI K7T Turbo2
(2)G-Luxon 2700uf 6.3v 10mm dia.
(2)G-Luxon 2200uf 6.3v 10mm dia.
(2)G-Luxon 470uf 16v 8mm dia.
(7)Teapo 1000uf 6.3v 8mm dia
the above ones should definitely be replaced. Personally i would replace the 2700 with 3300 unless TC doesnt have those in 10mm then 2200 instead.
(4)kzg ? 1500uf 16v 10mm dia. brown colored wrapping
(4)kze ? 4700uf 6.3v 12.5mm dia. green colored wrapping
The last ones (kzg & kze) is the only other markings.
These are probably chemicon which is not a crap brand but we have had some discussions here about fakes and reliability. So these would be optional to replace. The KZE are low spec and replacements from badcaps would be better spec. Personally i would replace those 8 too and finish the job 100%Comment
-
Re: MSI K7T Turbo2
Ok thanks willawake you've been most helpful,figured your suggestion would be just that after all the board is out already.Ive already put in a request for a custom kit without the suggested 3300uf replacing the 2700uf ones ,so I guess I should wait for a response back from BadCaps before confirming this order.Comment
-
Re: MSI K7T Turbo2
dont forget if the board is dead then it may be that more work than a recapping is needed but you dont know this until you recap it.Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt... -
Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.
Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
Power Board Connector that goes to Main board
CN6401
Pin 01 NC
Pin 02 NC
Pin 03 "BL_ON": 0V
Pin 04 "N/C"
Pin 05 "STBY 3.3V": 3.5V
Pin 06 "GND": N/C
Pin 07 "AC_OFF"... -
I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.
The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.
I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
Comment