Asus TUF X570 GAMING PLUS Motherboard BIOS fix

[rockman97]

Hello,
I had my old motherboard i really want build a HTPC and i want use this mobo but i tried BIOS update in 2024 and the motherboard is cooked it get orange led only tried change cpu ram everything but can't fixit. (I bought the motherabord second hand in 2023.)
It has a Winbond 25Q256JWEQ (I think this is a 1.8V model so i used the 1.8v adapter aswell.) Bios chip on it i tried reflash with my EZP2019+ programmer but when i manually choose a chip like similar to this i click the read button and only shows 000 and i can erase it when i try write i can't verify it.

I have a clip and i want use this i can't solder the chip.

Which chip is similar to this Winbond chip or how can i fix this?
Can i flash this type of chip with this programmer and how?

I have a BIOS file from ASUS Website.

Thanks for the help.

[SMDFlea]

You can try to add chip support - https://www.badcaps.net/forum/troubl...ro-programmers
Slow the speed down to 6Mhz as well

[rockman97]

I tried download the windows version but it says the file was removed. I can't install on linux. I asked the forum you linked me aswell hope i can reprogram this chip i tried 6mhz but the same result.

[m1ch43lzm]

Add chip support to EZP2019, EZP2019...ro Programmers
I downloaded the EZP2019+ software from the linked site, I attached them to my post in that thread

When using a clip, it takes several tries to align it properly, there's a Test button, it should read the Chip ID (EF6019)
Use the 1.8V adapter, manually select W25Q256FW

[rockman97]

Add chip support to EZP2019, EZP2019...ro Programmers
I downloaded the EZP2019+ software from the linked site, I attached them to my post in that thread

When using a clip, it takes several tries to align it properly, there's a Test button, it should read the Chip ID (EF6019)
Use the 1.8V adapter, manually select W25Q256FW

Thanks i try again with this. When i click the test button it shows 32 code and cant recognize the chip.