Hi there, I've got a HP Prodesk 600 G2 Mini on my bench, that turns on but no picture.
Model: HP ProDesk 600 G2 Desktop Mini
Product No: Y3J22EC#ABD
BID=15WWP3ET6**#SABD#DABD
Serial: CZC632BBCJ
First I thought maybe BIOS got corrupted. Someone sent my corrected BIOS that I flashed. Now symptoms are: Mini starts when power is plugged in, Fan turns on and gets faster and faster until it's at 100%. Nothing gets excessibly hot.
When I desolder the BIOS chip I get Beep codes / LED codes "BIOS is missing"
Without CPU I get "CPU missing", so there is some life left in it.
Any suggestions how to carry on diagnosing?
TIA
Model: HP ProDesk 600 G2 Desktop Mini
Product No: Y3J22EC#ABD
BID=15WWP3ET6**#SABD#DABD
Serial: CZC632BBCJ
First I thought maybe BIOS got corrupted. Someone sent my corrected BIOS that I flashed. Now symptoms are: Mini starts when power is plugged in, Fan turns on and gets faster and faster until it's at 100%. Nothing gets excessibly hot.
When I desolder the BIOS chip I get Beep codes / LED codes "BIOS is missing"
Without CPU I get "CPU missing", so there is some life left in it.
Any suggestions how to carry on diagnosing?
TIA