Fujitsu Esprimo K557/24 allinone desktop, boot logo

[p.puhakka]

Hello forum!

I have received a lot of help here, regarding bios modding. Very thankful!

Now I have a lot of Fujitsu K557 desktops, and those have custom bios logo/custom splash screen, and I need to change them to the original Fujitsu logo.

I am looking for the easiest way, because I have about 40pcs of them, and I think there is some "official" way to do this.

I have tried a lot of Fujitsu tools, which can inject the logo to the bios file, but no luck.

Any suggestions? Thanks!

[SMDFlea]

Let us know if that suggested tool works https://forums.mydigitallife.net/thr...fujitsu.74953/

[p.puhakka]

Yep, that was propably the only topic that I found about this. Finally had some time on weekend, and here is copy of my answer:

Finally I got time to continue testing on weekend. I got another usb-stick, and inject the logo with UefiModL-tool, flashed in DOS, and works great! It only flashes the logo in my case, so after that I also flash the newest BIOS with another usb-stick, and everything fine after that.


So works now, and with that tool you can change the logo. Thanks!

[SMDFlea]

Yep, that was propably the only topic that I found about this. Finally had some time on weekend, and here is copy of my answer:

Finally I got time to continue testing on weekend. I got another usb-stick, and inject the logo with UefiModL-tool, flashed in DOS, and works great! It only flashes the logo in my case, so after that I also flash the newest BIOS with another usb-stick, and everything fine after that.

So works now, and with that tool you can change the logo. Thanks!

Thanks for posting back,thats good to know