Hello,
I have a T3610 Precision workstation that recently stopped working properly. When the power button is pushed, the number 3 light turns amber and then goes out, then the power button turns white and stays on through the boot. At 3 seconds, the number 3 & 4 light come on and stay on for 8 seconds. Then the number 4 light goes out. Two seconds later the 1 & 2 light also come on (now 1,2 & 3 are on). 1 second later, light number 1 goes out and number 4 comes on. Then light 3 & 4 go out and then 1 & 3 come on (now 1,2 & 3 are on). This is how it remains.
The display never shows any boot information. I have three different display adapters and two different displays and no combination shows the boot info.
Any suggestions as to what I should try next?
Thanks,
I have a T3610 Precision workstation that recently stopped working properly. When the power button is pushed, the number 3 light turns amber and then goes out, then the power button turns white and stays on through the boot. At 3 seconds, the number 3 & 4 light come on and stay on for 8 seconds. Then the number 4 light goes out. Two seconds later the 1 & 2 light also come on (now 1,2 & 3 are on). 1 second later, light number 1 goes out and number 4 comes on. Then light 3 & 4 go out and then 1 & 3 come on (now 1,2 & 3 are on). This is how it remains.
The display never shows any boot information. I have three different display adapters and two different displays and no combination shows the boot info.
Any suggestions as to what I should try next?
Thanks,