Announcement

Collapse
No announcement yet.

Modified RTX3000 series BIOS files with memory channels disabled

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Modified RTX3000 series BIOS files with memory channels disabled

    Hi All

    I was looking for ways to disable memory channels in BIOS for a GTX 980 (found nothing) - however I did find a load for RTX3000 series cards - file name describes which memory channel is disabled and for which card - maybe of use to someone with a card that has a bad memory controller (and ram chip is good) to get the card running again with slightly less RAM.

    They look to be from Gigabyte cards originally.
    Attached Files
    Last edited by benwaterson; 01-02-2023, 12:45 PM.

    #2
    Re: Modified RTX3000 series BIOS files with memory channels disabled

    I've been looking for the same software for a gtx 1080 ti
    With one bad Chanel.
    Sure there must be some way to disable a chip by moding the bios/ firmware.
    Anyone when to add to the topic?
    Thanks

    Comment


      #3
      Re: Modified RTX3000 series BIOS files with memory channels disabled

      looking for the same in a 3080ti with a bad ic . it turns out its the E1 chip location but may have bad connection under the core. im not tryint to reflow it with my skill. dont mind a cheap 3080ti with less memory. it was cheap

      Comment


        #4
        Originally posted by yearlingchuy View Post
        Re: Modified RTX3000 series BIOS files with memory channels disabled

        looking for the same in a 3080ti with a bad ic . it turns out its the E1 chip location but may have bad connection under the core. im not tryint to reflow it with my skill. dont mind a cheap 3080ti with less memory. it was cheap
        3080ti is in those BIOS files

        Comment


          #5
          I was looking for ways to disable memory channels in BIOS for a GTX 980 => same with you , hope i can learned somthing from this post.

          Comment


            #6
            Old NVIDIA artifacts | GpuZelenograd
            please look at this link for detial.

            Comment


              #7
              Thank you, I really need this.

              Comment


                #8
                Anyone know if these 3060 bios files are for the 8 or 12 gb versions of these cards?

                Comment


                  #9
                  Work on 3080 Lhr versión?

                  Comment


                    #10
                    Curios where these came from. Looking for one for an rtx 2070 and hoping modified files for the 20 series cards are also present wherever these were found.

                    Comment


                      #11
                      Originally posted by Burnedoutplacebo View Post
                      Curios where these came from. Looking for one for an rtx 2070 and hoping modified files for the 20 series cards are also present wherever these were found.
                      not for 2gen. only for 3gen. its preproduction bios not for cards for sale

                      Comment


                        #12
                        Originally posted by ktmmotocross View Post

                        not for 2gen. only for 3gen. its preproduction bios not for cards for sale
                        thanks for the info.

                        Comment


                          #13
                          great resource, got my 3090 to work which had broken pads on channel B.
                          Is there is a similar trick for 1080/1080ti to disable memory channels?

                          Comment


                            #14
                            Originally posted by benwaterson View Post
                            Hi All

                            I was looking for ways to disable memory channels in BIOS for a GTX 980 (found nothing) - however I did find a load for RTX3000 series cards - file name describes which memory channel is disabled and for which card - maybe of use to someone with a card that has a bad memory controller (and ram chip is good) to get the card running again with slightly less RAM.

                            They look to be from Gigabyte cards originally.
                            if these are from gigabyte originally how can we adapt and write these into other brands like PALIT which is also LHR?

                            Comment

                            Working...