Ubiquiti firmware help. US-8-150W POE

[Chipbg]

EEPROM chip

[gurj1979]

Has anyone got a US-8-150W POE Firmware Dump (full dump) which as been Factory Reset ?
Desperate here.
Thanks.

[gurj1979]

So I managed to Console to the switch using Serial. The Firmware is Corrupt.
Does anyone have a good one I can use?

The MAC Address is not stored in the EEPROM - it's embedded in the Broadcom Network Processor.

Thanks

[gurj1979]

Tried those weeks ago. Without an interface it wont upload to the Switch. Need a dump file so I can use EEPROM Write to the chip. Plus - the dump will have my MAC Address in it.
The firmware on the chip is that bad / corrupt that it wont even bring up Console, so I can't even SSH to it and use Upgrade command

[hoaca388]

TRy : https://ui.com/download/software/us-8-150w

[gurj1979]

Hi guys.

I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.

So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
Got New chip and writes good.

THE PROBLEM...
It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.

Does anyone have a Good Firmware I can have?
Or can you repair my firmware?
I have attached mine if you need to compare.

Thanks.