Re: Acer AL2423W: Recapped, Still Dead!
I can't answer your first questions yet as I am at work.
But I can answer the rest.
If another pic from this board is correct (from member Tonnes, click to view), the voltages work like so:
1=5v
2=12v
3=19v
CNS1 goes to the logic card. It's labeled as having 5v and 12v as seen on the board.
The inverter connects via CNS2 and has no labels regarding voltage. It obviously gets 19v, but unsure about the others.
Will get back to you on with the other questions later today.
Thanks, PB!
I can't answer your first questions yet as I am at work.
But I can answer the rest.
If another pic from this board is correct (from member Tonnes, click to view), the voltages work like so:
1=5v
2=12v
3=19v
CNS1 goes to the logic card. It's labeled as having 5v and 12v as seen on the board.
The inverter connects via CNS2 and has no labels regarding voltage. It obviously gets 19v, but unsure about the others.
Will get back to you on with the other questions later today.
Thanks, PB!
Comment