Re: CCFL to LED conversion where inverter is integrated into the power board
"I'd need to blow away quite a bit of the circuitry or at least figure out where to cut the PCB to disable the CCFL driver, but need to make sure the rest of the monitor is still working before I proceed further."
Where are the good clear pictures of your board top and bottom side?
"I'd need to blow away quite a bit of the circuitry or at least figure out where to cut the PCB to disable the CCFL driver, but need to make sure the rest of the monitor is still working before I proceed further."
Where are the good clear pictures of your board top and bottom side?
Comment