Sam, There are multiple ways to do this - depends on your interfaces and what role those computers play on the battery testers, and the software capabilities... there is a software called Nagios, using which you would write your own scripts and capture the data from each of these computers, and then collate them to represent it on a dashboard..
you may be able to take use of Copilot using which you can screen scrape the data from the computers and populate a table and then display them on screen...
these are not the only two ways as there are multiple ways of doing this.. to start with read these approaches and see if they can help you.. honestly if its just battery monitoring some bms support data via snmp..
Two computers on one monitor and view both of them at the same exact time
Collapse
X
-
You seem to have already solved this, but how about two HDMI/USB video capture cards ? Then open two capture windows on the target machine/display ?Leave a comment:
-
Sam,
However when I read your original usecase, you can go software route of using HTML and javascript to show the twobattery monitors without disturbing any of the screens and doing delicate maneuvering of hardware approach. This way the look and feel can also be customized and you can scale up to even multiple different chargers.
Leave a comment:
-
Sam, This is possible via the hardware route where you take identical monitors and pry open the LCDs and remove the backlight and filter from one of the monitors leaving only the LCD layer and then disassemble the other monitor and insert the bare LCD from first monitor into second. You will need quite a bit of skillset to be able to do that.
However when I read your original usecase, you can go software route of using HTML and javascript to show the twobattery monitors without disturbing any of the screens and doing delicate maneuvering of hardware approach. This way the look and feel can also be customized and you can scale up to even multiple different chargers.
Leave a comment:
-
To switch between screens instead of going up to the device but I also want another one for the other computer cart that I have as well and that one I do not need the remote forLeave a comment:
-
https://www.ebay.com/itm/16690324712...Bk9SR67IsonGZA
I bought one of these split screen generator and it works perfectly for how I am wanting to use it when I get the computers setup with the battery testing machine I will take a picture of the monitor screen
The one I bought does not come with the remote but I going to buy another one and this time I will make sure that it comes with the remoteLeave a comment:
-
Back to the topic that was originally discussed
I did buy the split screen device to try it out I will post the results of testing it once I get and hook it upLeave a comment:
-
At least it's fixed now thanks to SMDFlea! Hopefully he can figure your why. Just think if that spam filter has too many false flag events, it keeps the mods on their toes as well with extra crap that shouldn't be happening.
Leave a comment:
-
At least it's fixed now thanks to SMDFlea! Hopefully he can figure your why. Just think if that spam filter has too many false flag events, it keeps the mods on their toes as well with extra crap that shouldn't be happening.Leave a comment:
-
-
-
-
-
Leave a comment:
-
The reason for getting a split screen is that would like to have only one screen on because it bad enough that I have more than one computer running because of needing to run multiple battery testing machines and all I interested in is looking at the graph for the results
The reason for running more than one computer is that yes you can have more than one battery testing machine on a single computer however its sometimes gives trouble going from one battery testing machine to the other battery testing machine and because you can not give the individual battery testing machines different names you sometimes you do not know which battery testing machine you have up on the screen but with a spit screen device you can assign a certain potion of the screen to a certain battery testing machine and then click the number a certain number and have this battery testing machine full screen then go back split screen
I want to use one 65” tv as just a monitoring device for viewing the screen because it much easier to view the graphs the bigger the screen that is the reason I asked in another post about making a smart tv a dumb tv and making not able to access the internet what so everLeave a comment:
-
-
Originally posted by sam_sam_samWhy has this post been flagged as spam really are you seriousLeave a comment:
-
The reason for getting a split screen is that would like to have only one screen on because it bad enough that I have more than one computer running because of needing to run multiple battery testing machines and all I interested in is looking at the graph for the results
The reason for running more than one computer is that yes you can have more than one battery testing machine on a single computer however its sometimes gives trouble going from one battery testing machine to the other battery testing machine and because you can not give the individual battery testing machines different names you sometimes you do not know which battery testing machine you have up on the screen but with a spit screen device you can assign a certain potion of the screen to a certain battery testing machine and then click the number a certain number and have this battery testing machine full screen then go back split screen
I want to use one 65” tv as just a monitoring device for viewing the screen because it much easier to view the graphs the bigger the screen that is the reason I asked in another post about making a smart tv a dumb tv and making not able to access the internet what so everLast edited by sam_sam_sam; 09-19-2024, 04:47 AM.Leave a comment:
Related Topics
Collapse
-
by momakaNormally, I never post repairs this quick after I do them, because… I am usually very slow.
But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though.
I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
-
Channel: Troubleshooting Computer Displays
-
-
by ant3202Hi Everyone
Lately I am experiencing the deja-vu incident on one of the led monitor like this.
https://www.badcaps.net/forum/troubl...lashing-on-off
The monitor is HP 27es LED Monitor
https://h30434.www3.hp.com/t5/Deskto...e/td-p/6804692
The monitor will randomly blackout and display no signal and will recover again.
Sometimes need to power and off again to restore the display but...-
Channel: Troubleshooting Computer Displays
-
-
by Rick_1234Good evening, gentlemen.
I have a problem with my monitor. It turns off after a few seconds or flickers. Shining a flashlight on the screen doesn't show any image, so I guess it's not the "2 seconds to dark" I read in the forum.
To turn it back on, I have to press the power button twice. Then after a few seconds it turns off again or flickers. See video.
https://drive.google.com/file/d/1L6S...ew?usp=sharing
Things I tried
- Bought a new AC adapter thinking that was the problem but the problem...-
Channel: Troubleshooting Computer Displays
-
-
by momakaLooking through my repair pictures and notes, it's been a long time since I posted anything in the LCD monitors section. So here goes that.
I'm dedicating this thread to one of the very first LCD monitors I repaired (if not the first one), which was more than 10 years ago now. The monitor is a Wise Wing, model F199. It's a 19” CFL-backlit LCD. I got it for free off of Craigslist in 2009 from a guy, who said he bought it for cheap from Wallmart and the monitor worked only for a little less than 2 years before quitting.
When I saw the Craigslist post, I wasn't...-
Channel: Troubleshooting Computer Displays
-
-
by sew333My pc:
10850K stock 4800mhz stock Kraken X73 good temps
2x16 GB DDR4 GSKILL 3000mhz XMP
Seasonic Tx-850 Ultra Titanium
Gigabyte Rtx 3090 Gaming OC
Aorus Z490 Pro Gaming
1 TB SSD
4 weeks ago i launched Metro Exodus Enhanced and during cinematic advertisement part ( 30 fps ), pc just shutdown.
Also monitor flickered with NO SIGNAL 10 seconds after shutdown. So only monitor and pc was affected.
Next i pressed only power button, rebooted again and its fine again. Happened once and i cant reproduce.
Power... - Loading...
- No more items.
Leave a comment: