Vizio E320i no backlight, flashlight test good.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • adam3303
    Member
    • Mar 2014
    • 41
    • USA

    #1

    Vizio E320i no backlight, flashlight test good.

    Please bare with me. I'm very much a novice at this kind of thing. Only swapped out some leaky caps on some lcd monitors in the past. Bought this tv cheap. Figured it would be pretty easy to diagnose. TV powers on, but no visible display. Using the flashlight trick I can see the Vizio setup menu. Don't have a DMM yet, but it is on the way. I'm curious if someone could point me in the right directions on how to measure the voltages both coming from the power board and the voltages on the main board. I somewhat understand what to look for, but the lack of pins coming from the power has me unsure of what voltage I should expect to read and what I should look for on the main board. I'm assuming that my problem is on the main board (maybe voltage regulator or something). Just a guess without a meter though. Any help is greatly appreciated. Full model number is Vizio E320i-a0.
    Attached Files
    Last edited by adam3303; 03-11-2014, 08:42 PM. Reason: Added full model number.
  • adam3303
    Member
    • Mar 2014
    • 41
    • USA

    #2
    Re: Vizio E320i no backlight, flashlight test good.

    Man is it late. Moderator can you move this to tv's and video sources please.
    Thanks.
    Last edited by adam3303; 03-11-2014, 08:43 PM.

    Comment

    • Davi.p
      Hobbist Tech
      • Sep 2009
      • 4275
      • Italy - Milan

      #3
      Re: Vizio E320i no backlight, flashlight test good.

      Hi, it's a led backlight type i think.. on the mainb. there are 2 white connectors that forms an "L", one 5 pins , one 6 pins, on the picture 5 are on hour 7.. those seem to be the led B.L. power outputs, i'm not expert, never repaired one of this type.. check the voltage on each pin, if there is no voltage on some pins, with meter's continuity test (beep) check which ones are connected to board's ground and which are con. to one pin of those grey coils (inductors)..
      on the first picture to up-right there's a stripe board, is that the front buttons board?
      The conn. that goes to led b.light seem to be the one with all black wires apart one white that goes to the side, the other near that goes to the bottom center is probably the ir receiver.
      Last edited by Davi.p; 03-15-2014, 03:08 AM.

      Comment

      • Davi.p
        Hobbist Tech
        • Sep 2009
        • 4275
        • Italy - Milan

        #4
        Re: Vizio E320i no backlight, flashlight test good.

        Check diodes marked in red, possible transistors marked in green (if them are marked Dxxx are diodes), inductors ar marked in yellow, in the center of the row of 4 inductors there is an IC with pins on 4 sides, tell me its part num.
        Attached Files
        Last edited by Davi.p; 03-15-2014, 03:23 AM.

        Comment

        Related Topics

        Collapse

        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          11-22-2024, 01:46 PM
        • ohren
          Upgrading a Samsung ue55nu7096u with logic board from an ue55ru7105k -- good idea?
          by ohren
          I hope this is the right forum to post in despite not technically being a repair, but still a question of swapping boards.

          I thought I'd explore the possibility to upgrade an existing working Samsung ue55nu7096u with the logic board (and power board if needed) of a newer model (ue55ru7105k) of the same size and appearance (and resolution). The reason being I'd like the extra inputs of that board including component in, an extra HDMI port and bluetooth. Its panel is broken so I have no use for the board otherwise.

          The models launched in 2018 and 2019 respectively....
          09-08-2023, 05:24 PM
        • howardc64
          A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
          by howardc64
          Problem

          This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
          08-04-2024, 10:36 PM
        • Dani_2024
          Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
          by Dani_2024
          Hi and thanks in advance for any input you might provide!
          I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
          Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

          Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
          10-28-2024, 05:06 PM
        • m1ch43lzm
          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
          by m1ch43lzm
          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
          05-12-2025, 08:37 PM
        • Loading...
        • No more items.
        Working...