Samsung T200

[sabre504]

Hi all some help required
I have a Samsung T200 monitor i picked up to repair (no power)

Opened it up and found someone has already tried to repair it and made a bit of a mess of it (wrong caps a damaged tracks) using Jamicon 85*c caps .

Anyway the help i need is with 2 caps i think are the wrong

C103 = 47uf 25v
C204 = 10uf 50v

C103 is on the primary side

C204 is on the secondary side See pic

I think C204 should be the 47uf 25v as it is in a cluster of 25v caps
and C103 should be the 10uf 50v as it is on the primary side.

Has anyone got this power board BN44-00177D that can confirm this for me

Thanks in advance

[lexwalker]

Re: Samsung T200

I have a Samsung T200 monitor i picked up to repair (no power)

Opened it up and found someone has already tried to repair it and made a bit of a mess of it (wrong caps a damaged tracks) using Jamicon 85*c caps .

Anyway the help i need is with 2 caps i think are the wrong

C103 = 47uf 25v
C204 = 10uf 50v

C103 is on the primary side

C204 is on the secondary side See pic

I think C204 should be the 47uf 25v as it is in a cluster of 25v caps
and C103 should be the 10uf 50v as it is on the primary side.

Has anyone got this power board BN44-00177D that can confirm this for me

I think those are actually correct. C103 is 47uF, and C204 is 10uF. Just that the rectifier diodes are missing! Looking at images from around the web, like this one here: http://www.shopjimmy.com/samsung-bn4...upply-unit.htm (which has a very large image that is zoomed in when placing the pointer over the designated area) you could see that C103 is much bigger than C204.

[sabre504]

Re: Samsung T200

Cheers mate will check for the diodes ,but should have said that rhe pic was just for location and is not the board i am working on sorry.

Will double check everything today and post proper pic if still no joy
Paul