hello.
i have an Asus display, model VW192D with no 5V and 12V power. psu model is Delta EADP-45AF.
the monitor has been serviced elsewhere before but i have no info what has been done it. i can see some caps changed and the ccfl transformer removed, but this is another issue.
tested so far:
in the secondary circuit:
fuses: ok
rectifiers: no one shorted.
in the primary:
main rectifier: ok
main DC current: around 330V
diodes: no one is shorted.
resistors: all seem good.
Q101: not shorted
voltages of C101:
except pin 2: 4.8V, all other pins show 0 voltage in respect to the (-) minus from the rectifier.
i have found a repair manual of a similar display which has this psu too, but no info about voltages was given.
any idea is appreciated. thank you.
i have an Asus display, model VW192D with no 5V and 12V power. psu model is Delta EADP-45AF.
the monitor has been serviced elsewhere before but i have no info what has been done it. i can see some caps changed and the ccfl transformer removed, but this is another issue.
tested so far:
in the secondary circuit:
fuses: ok
rectifiers: no one shorted.
in the primary:
main rectifier: ok
main DC current: around 330V
diodes: no one is shorted.
resistors: all seem good.
Q101: not shorted
voltages of C101:
except pin 2: 4.8V, all other pins show 0 voltage in respect to the (-) minus from the rectifier.
i have found a repair manual of a similar display which has this psu too, but no info about voltages was given.
any idea is appreciated. thank you.
Comment