HANNSPREE HF289H Black Screen No Power

Collapse
X
Collapse
 
  • Page of 5
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 template Next
  • RonBhay
    New Member
    • Jan 2016
    • 1
    • Canada
    #81
    Re: HANNSPREE HF289H Black Screen No Power

    I too have the same problem with my monitor, will try replacing the caps. I was also thinking of replacing the CFL lamps with LED strips. My question is can I discard the high voltage inverter board? Many thanks in advance . .

      Comment

      Previous 1 2 3 4 5 template Next

      Related Topics

      Collapse
      • PantherDave
        Microsoft Surface Pro (5th gen) model 1796 - no power
        by PantherDave
        Hi all!

        I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

        I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
        https://www.badcaps.net/forum/troubl...-hardware-devi...
        05-29-2024, 02:01 PM
      • grimacelord
        HP 15-EH1070wm - Black Screen With Power LED.
        by grimacelord
        Hello,

        I have an HP 15-eh1070wm laptop that came to me for the same reasons I am starting this thread. The charging LED appears when the laptop power adapter is connected and the power LED appears when pressing the power button, but nothing appears on screen.

        First thing I did was take off the bottom panel and remove the battery and then press and hold the power button for 30 seconds and then reinstall the battery and power on. The fan spins and this time, the back light illuminates and a brief message appears on the screen for about 1 second saying something along like,...
        01-28-2023, 10:50 AM
      • joaquinmjuan
        Canon TS8350 Screen Freezes on Power On
        by joaquinmjuan
        Hello, I have a Canon TS8350 printer. The problem is that when I turn it on, "CANON" appears on the screen, but it never goes away. You can leave it on for a whole day, and it doesn't go away. Does anyone know how to fix this? I've tried unplugging it, but nothing. I've also tried holding down POWER, but nothing. In fact, once it turns on, it can't be turned off with the Power button. I've also held down Power and then plugged it into the Power supply, and the power light flashes once and doesn't turn on, but then when I press Power again, it turns on. Currently, it's a nearly new paperweight,...
        05-07-2025, 12:26 AM
      • sam_sam_sam
        Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
        by sam_sam_sam
        I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

        One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
        03-31-2024, 02:12 PM
      • Alicat
        Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
        by Alicat
        Hello,

        Stopped by this site trying to fix my parents Panasonic Plasma TV.

        Model number is TH-50PZ85U

        Power comes on and the red power light stays on solid.

        Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

        I also hear a few clicks.

        I also think my parents said there was a thunderstorm and the TV failed after that.

        Section 6 in the service manual talks about power and no screen,...
        10-30-2024, 10:09 AM
      • Loading...
      • No more items.
      Working...