Greetings all,
I want to thank all those that will answer my thread in regards to my issue. I have done a search on this website and elsewhere, I have the same symptoms of many others however I don't believe that my problem isn't as far as so many others.
Gateway – FPD2485W | 24”
Some Details: In the last couple of days, I have experienced what so many have in regards to their LCD TV monitor, going blank after attempting to turn it on. I receive what others have stated as being the 2 second to black screen. When I have experienced this, I have waited aprox 10secs and tried again and it turns on just fine, that was yesterday. Today, it wouldn't catch even after trying, waiting to try and power it up again, and nothing. Therefore, I unplugged it and it turns right on. As well, I want to note that this only happens after perhaps the monitor sitting for aprox 12hrs or more, but if I turn it off and on throughout the day, I don't experience this at all.
All power LED lights come on, they flicker off after trying to turn the monitor on but the blue LED lights are in there normal position and DON'T go dark, but no picture, I do receive the logo, which flickers and goes off with no picture and ive notice that the screen coming on is a lot slower than usual.
Iam receiving no unusual colors, or lines, I do receive a slower start up. Screen image disappears after several seconds. No diming of the monitor as well, is as bright as it has always been.
In researching these problem through your website, to that of some videos on Youtube which I have found to be very useful as well. I just have a few questions in regards to my specific issues, while there are those that have the same issues, I don't believe mine per se have become sever problem that others have had.
Note: My monitor power button is a censor, not a physical button itself.
What I have done at this stage; I have researched a lot to understand the problem, through your website and others.
Questions: I have not taken the monitor apart yet, in order to understand the situation and receive some answers to my issue, I realize that I need to take apart the monitor however, which part would I be looking for per se?
In researching, I feel confident that I can do what needs to be done, I realize I need to inspect that of the board itself, but like I have stated, I have a censor button, not a physical button, if it is the power board or that of the inverter board, or are they one in the same?
I look forward to some clarification on my situation and my problems.
Cheers,
A
I want to thank all those that will answer my thread in regards to my issue. I have done a search on this website and elsewhere, I have the same symptoms of many others however I don't believe that my problem isn't as far as so many others.
Gateway – FPD2485W | 24”
Some Details: In the last couple of days, I have experienced what so many have in regards to their LCD TV monitor, going blank after attempting to turn it on. I receive what others have stated as being the 2 second to black screen. When I have experienced this, I have waited aprox 10secs and tried again and it turns on just fine, that was yesterday. Today, it wouldn't catch even after trying, waiting to try and power it up again, and nothing. Therefore, I unplugged it and it turns right on. As well, I want to note that this only happens after perhaps the monitor sitting for aprox 12hrs or more, but if I turn it off and on throughout the day, I don't experience this at all.
All power LED lights come on, they flicker off after trying to turn the monitor on but the blue LED lights are in there normal position and DON'T go dark, but no picture, I do receive the logo, which flickers and goes off with no picture and ive notice that the screen coming on is a lot slower than usual.
Iam receiving no unusual colors, or lines, I do receive a slower start up. Screen image disappears after several seconds. No diming of the monitor as well, is as bright as it has always been.
In researching these problem through your website, to that of some videos on Youtube which I have found to be very useful as well. I just have a few questions in regards to my specific issues, while there are those that have the same issues, I don't believe mine per se have become sever problem that others have had.
Note: My monitor power button is a censor, not a physical button itself.
What I have done at this stage; I have researched a lot to understand the problem, through your website and others.
Questions: I have not taken the monitor apart yet, in order to understand the situation and receive some answers to my issue, I realize that I need to take apart the monitor however, which part would I be looking for per se?
In researching, I feel confident that I can do what needs to be done, I realize I need to inspect that of the board itself, but like I have stated, I have a censor button, not a physical button, if it is the power board or that of the inverter board, or are they one in the same?
I look forward to some clarification on my situation and my problems.
Cheers,
A
Comment