Samsung 2493HM issue

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • retiredcaps
    Badcaps Legend
    • Apr 2010
    • 9271
    #41
    Re: Samsung 2493HM issue

    Originally posted by werthles
    I tried to get my camera to focus on that chip and to no avail. Ill note what numbers i see around it. Maybe IC304 is its part number.
    1) For best picture quality and clarity take your boards to a window on a sunny day, turn flash off, and use macro mode. Take a top down view of all your boards (front and back). Make sure the photo is legible so that we can read the PCB printing clearly. A shutter speed of 1/125 or faster will produce nice clear focused pictures. Try to get a photo that is 2000x2000 resolution or as close as possible.

    2) IC304 is the PCB board designation.
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---

      Comment

      • werthles
        Member
        • Feb 2011
        • 24
        #42
        Re: Samsung 2493HM issue

        Ok, i will play around with my camera tomorrow when the sun is up.

          Comment

          • Skurg
            New Member
            • May 2011
            • 1
            #43
            Re: Samsung 2493HM issue

            Was Werthles able to repairhis monitor? I have a 2493HM with the same blown cap but with no led when powered up. Haven't gone much further than this. Any thoughts?

              Comment

              • retiredcaps
                Badcaps Legend
                • Apr 2010
                • 9271
                #44
                Re: Samsung 2493HM issue

                Originally posted by Skurg
                I have a 2493HM with the same blown cap but with no led when powered up.
                Same as above. Post pictures following the guidelines in my sig file below.
                --- begin sig file ---

                If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                Please do not post inline and offsite as they slow down the loading of pages.

                --- end sig file ---

                  Comment

                  Previous 1 2 3 template Next

                  Related Topics

                  Collapse
                  • Kjell
                    Samsung Series 9 - BIOS issue
                    by Kjell
                    After installing Linux, I can no longer enter the BIOS of my Samsung Series 9 (NP900X3C) laptop. When pressing [F2] during boot I simply get a black screen. Same thing when pressing [F10] and choosing "Setup" from the "App Menu" tab. Apparently this is a relatively common issue with Samsung laptops of that generation, but unfortunately i haven't been able to resolve the issue (yet).

                    Things i've tried so far; reinstalled Windows 10, checked for redundant boot entries, tried to factory reset using the emergency keyhole, attempted to clear the NVRAM by physically...
                    08-01-2025, 09:15 AM
                  • Document Archive
                    Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                    by Document Archive
                    This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                    09-07-2024, 05:50 AM
                  • Nairolf
                    Samsung DM32D – Red LED blinks 5 times, won’t start (possible mainboard issue)
                    by Nairolf
                    Hello,

                    I have a Samsung DM32D display.
                    When I try to power it on, the red LED blinks 5 times and nothing happens—the unit won’t start.

                    Here’s what I have tried so far:
                    1. Disconnected the cable between the mainboard and the power supply → the backlight turns on.
                    2. Disconnected the main T-CON ribbon cable → same issue as before, the LED still blinks 5 times.
                    3. Disconnected one of the two T-CON ribbons to the panel (tested each one separately) → same issue, the LED blinks 5 times.

                    From these tests, I suspect the problem might be on the mainboard. Could anyone...
                    3 Photos
                    08-24-2025, 03:47 AM
                  • vincentedel
                    Samsung SyncMaster 740n Phase Control Issue
                    by vincentedel
                    Hello,
                    I'm having an issue with the Samsung 740n's phase control setting. When I use the automatic adjustment, it sets the value to around 54 (with a range of 0-100), and the picture looks clear and sharp. However, after some time—like after playing a game—the text starts to look blurry. When I auto-adjust again, it may increase the value to 80, and everything becomes sharp once more. Yet, after a while, whether it's a few hours or a day later, the same blurriness returns, and I have to adjust it again.

                    I'm using the Samsung 740n monitor drivers instead of the default plug-and-play...
                    04-22-2025, 12:33 AM
                  • Manucsl
                    QE65Q800TATXXC Samsung TV Issue
                    by Manucsl
                    Hello.

                    My TV is a QE65Q800TATXXC Samsung TV.

                    Issue : When you plug the 220V, voltages are OK on the power board and you can hear the click from the relay, but TV is not starting when power button is pressed. Red led is blinking when you press power button. But no images or sound ( Back-light is off )
                    Then if you disconnect the cable from the main board to the power supply, the TV back-light turns on.
                    Any ideas to check would be very appreciated 😊

                    After reading some posts on this forum, I suspect an eeprom issue so I bought a CH341A to dump...
                    02-19-2025, 07:47 AM
                  • Loading...
                  • No more items.
                  Working...