Bose Soundbar 500 series bios dump request

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fricosu007
    Member
    • Feb 2016
    • 29
    • romania

    #1

    Bose Soundbar 500 series bios dump request

    Hello guyz ! i got stuck on a piece of BOSE soundbar 500 series with boot loop after latest firmware update, nothing works, uploading new firmware gives an error at the end, i found two eeproms soldered on the motherboard, managed to read them but the w25q128 seams to be empty while the 25q16 looks kinda ok from the data but i am sure there is something wrong with it. Maybe you guys have one around .. would be nice to try and flash your dump onto mine ! many thanks !

Related Topics

Collapse

  • Habble7
    I need a BIOS dump for the Samsung S49CG934SU monitor
    by Habble7
    The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

    Suspected Cause:
    I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

    Troubleshooting Attempts:
    ...
    05-22-2025, 07:28 AM
  • Kjell
    Samsung Series 9 - BIOS issue
    by Kjell
    After installing Linux, I can no longer enter the BIOS of my Samsung Series 9 (NP900X3C) laptop. When pressing [F2] during boot I simply get a black screen. Same thing when pressing [F10] and choosing "Setup" from the "App Menu" tab. Apparently this is a relatively common issue with Samsung laptops of that generation, but unfortunately i haven't been able to resolve the issue (yet).

    Things i've tried so far; reinstalled Windows 10, checked for redundant boot entries, tried to factory reset using the emergency keyhole, attempted to clear the NVRAM by physically...
    08-01-2025, 09:15 AM
  • Citymin
    NT955XED (Samsung Galaxy Book2 Pro - 15.6) BIOS dump file Request
    by Citymin
    Hi all,

    My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
    The charging red LED lights up, but the charging screen doesn't show any indication.
    When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
    (I've tried removing the battery and resetting the device, but the issue persists.)

    NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
    PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
    S/N : 5RNK9FFT70...
    Yesterday, 05:12 AM
  • DynaxSC
    MSI PRO B660M-G DDR4 - real bios dump from board needed (no stock bios)
    by DynaxSC
    Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).

    I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...
    11-17-2023, 10:56 AM
  • MDSI
    HP OMEN 17-an012nf BIOS dump with EC (DAG3BAMBAF0 REV : F)
    by MDSI
    Hello,

    I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.

    Details:
    Model : HP OMEN 17-an012nf
    Motherboard Part Number : DAG3BAMBAF0 REV : F
    Serial Number (S/N) : 5CD7280D51
    BIOS chip : Winbond W25Q64VSIQ
    Programmer : EZP2023+
    Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.

    I already...
    07-28-2025, 07:11 AM
  • Loading...
  • No more items.
Working...