Hello, Aiwa player stocked on stby red light only, anyone with help or service manual
Aiwa compact disc stereo cassette receiver .model CX-NSZ50k
Collapse
X
Related Topics
Collapse
-
by Junior††
Good Afternoon fellas,
Issue:
Disc is showing as not supported when a disc is put in.
Here's what I've done, you can skip this if you just wanna know the question:
- replaced with a disc drive from a donor ps5 (honestly questionable if this is known to work)
- reflowed the disc drive connector
-reflowed the chip in question (shown on image)
- I will say this console was very dusty so it's conceivable that it got so hot that it made the chip joints cold and potentially other things on the board
Question:
I... -
This specification for the ACER Veriton VX2640G-I3710 COMPACT DT can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Veriton VX2640G-I3710 COMPACT DT boardview and Veriton VX2640G-I3710 COMPACT DT schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...09-12-2024, 03:30 PM
-
by m4a2t0tCan I replace a ceramic disc cap with a multilayer ceramic cap? I cant even find .047 uf disc caps at digikey, mouser or newark. The places I do find them want anywhere from 25c to $3 each, at any quantity, plus shipping....
-
Channel: General Capacitor Questions & Issues
-
-
by Munem2xTV model AIWA JH42DS300S SMART
Chassis TP.SK506S.PB802
Hi,
I need USB firmware for AIWA because video is frozen and remote controller not working.
I tried firmware recovery file via USB but nothing changed....11-05-2023, 04:58 AM -
Hi.
I bought a Cheap HIFI to use as my PC output and speakers and forgot to check if it had an input. It doesn't.
Is there any way to add a stereo input. I have a bunch of Phono sockets I am not using.
Where in the circuit is the best place to solder the 3 stereo input wires?
This is the model and schematics:
https://www.manualslib.com/manual/91...7l.html#manual-
Channel: General Computer & Tech Discussion
-
- Loading...
- No more items.