Emotiva UMC-1

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • elmo
    Member
    • Dec 2014
    • 21
    • USA

    #1

    Emotiva UMC-1

    I have had my Emotiva UMC-1 surround processor for about six years. Suddenly it won't boot up anymore. Has anyone else had this experience?

Related Topics

Collapse

  • privato89
    Nintendo Switch Oled HEG-001: Second-Stage Boot Failure
    by privato89
    Hello everyone,

    I'm facing an issue with a HEG-001 motherboard that is unable to complete the Second-Stage Boot. I'd like to start directly with my conclusion, which is the decision to replace the MAX77621AEWI chip, and understand if it could be a correct evaluation.

    Before I dive into the process that led me to this decision, I want to mention that I have a fully equipped lab where I can perform any kind of tests.

    Let's begin:

    Following some guides online, I tried to understand how the Boot phase of the Nintendo Switch works, and what are the...
    03-26-2024, 06:37 AM
  • hinisa
    Xiaomi router freezes at boot after re-capping
    by hinisa
    I'm using Xiaomi Router 4A gigabit edition as wireless repeater. It worked fine for 2 years or so, but last week, wireless started to disappear.

    When I unplug/replug the power, it was working fine for a day/half a day or so until it freezes again.

    After testing with different power supply adapters and concluding it wasn't the issue I finally opened the case and this was the situation:



    Anyway I proceed to clean up the mess and replace all caps but unfortunately it made the situation worse. Now router can't even boot, either it freezes during...
    07-08-2023, 05:58 AM
  • Luke Anders
    Lenovo Legion 5 (15ACH6H/17ACH6H) - Does not boot into any OS
    by Luke Anders
    Hi everyone,

    A few details about the laptop itself:

    Name: Lenovo Legion 5
    Model: 15ACH6H (according to its back cover details) / 17ACH6H (according to the BIOS Menu)
    BIOS Version: GKCN60WW
    EC Version: GKEC65WW
    Serial Number: PF39AQ7Z
    Board Model: NM-D562 Rev 3.0
    RAM: 16GB Installed, DDR4 (brand new)
    NVME: 500GB NVME drive (brand new, installed Windows 10 onto it for testing purposes and tested on another laptop (a dell XPS) works perfectly fine and boots in)

    I bought this laptop recently from eBay as a faulty device....
    10-12-2024, 05:13 AM
  • NolesFan
    Samsung un82ru88000f - Boot loop sort of but can correct with taping of LVDS ribbon
    by NolesFan
    Hello all... TV started boot looping. Opened the back panel and tried to isolate the problem. Just PSB no boot loop. PSB and MB no boot loop. Plug in the LVDS from panel to MB and boot looping starts up. It doesnt matter of order that I plug the LVDS ribbons back in, only 1 and no boot loop but as soon as 2nd one plugs in boot looping. I then noticed a flicker on the screen when I was closing the clip on the harness to the LVDS. Shut the lights off so I can see better, and I noticed as i slowly close it, I will get a picture, but as soon as it clips in, I lose picture and booting happens. So I...
    10-24-2024, 06:36 PM
  • Ryan.man
    Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
    by Ryan.man
    Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

    My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

    This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
    02-04-2025, 12:23 PM
  • Loading...
  • No more items.
Working...