Announcement

Collapse
No announcement yet.

Sonos Play 1 with blown cap and fuses

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Sonos Play 1 with blown cap and fuses

    Hi there.
    I was given a Sonos Play 1 (yeah, very old) that does not turn on.
    Checking the main board, I can see a blown cap, that connects to two blown fuses. Right by the LAN port.
    Where should I start looking for the main fault?
    Thank you.
    Attached Files
    Last edited by SMDFlea; 08-13-2023, 02:41 AM.

    #2
    Re: Sonos Play 1 with blown cap and fuses

    lightning strike,
    r27,r46 and more
    i cant zoom in because fucking IMGUR was used

    Comment


      #3
      Re: Sonos Play 1 with blown cap and fuses

      Originally posted by stj View Post
      lightning strike,
      r27,r46 and more
      i cant zoom in because fucking IMGUR was used
      I see those are gone, along with the cap.
      Imgur works just fine here to see full image.
      Try these links.

      MOD Edit: Images copied and posted to badcaps
      .
      Last edited by SMDFlea; 08-13-2023, 02:43 AM.

      Comment


        #4
        Re: Sonos Play 1 with blown cap and fuses

        desolder the network transformer and meter the coils in it.

        if it wont boot without the transformer then it may have fried the network chip - i hope it's seperate and not part of the cpu!

        Comment


          #5
          Re: Sonos Play 1 with blown cap and fuses

          Originally posted by stj View Post
          desolder the network transformer and meter the coils in it.

          if it wont boot without the transformer then it may have fried the network chip - i hope it's seperate and not part of the cpu!
          Would it be the one with the number 2 next to it, with TP366 printed between its legs on the back side of the board?

          Comment


            #6
            Re: Sonos Play 1 with blown cap and fuses

            cant find it in the photo!
            desolder the network transformer connected to the burned bits and then meter the pads on the board to see if other stuff is shorted.
            i presume you already did the finger test to see if any chips are cooking

            Comment


              #7
              Re: Sonos Play 1 with blown cap and fuses

              Originally posted by stj View Post
              cant find it in the photo!
              desolder the network transformer connected to the burned bits and then meter the pads on the board to see if other stuff is shorted.
              i presume you already did the finger test to see if any chips are cooking
              I did use a thermal cam and nothing seems to get hot.
              I'll try removing it later and check for shorts on the pads. I'll report back.
              Thanx.

              Comment

              Working...
              X