Mystery Component

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gahuubard
    New Member
    • Dec 2022
    • 4
    • USA

    #1

    Mystery Component

    I've been sorting through recently acquired boxes of components that I got at the estate sale of an old-school ham radio operator. Even with my elementary level of knowledge I've been able to identify a lot of the parts (the obvious stuff). With the help of others I have most of the not-so-obvious stuff figured out. Then there's this thing. I've heard several guesses but no one seems 100% sure. Does anyone here know what this is in the attached photo?
    Attached Files
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30950
    • Albion

    #2
    Re: Mystery Component

    some type of tuning coil for a resonant circuit.
    the screw at the bottom pushes a core into the center of the coil on the outside causing the inductance to change

    Comment

    • redwire
      Badcaps Legend
      • Dec 2010
      • 3900
      • Canada

      #3
      Re: Mystery Component

      These tuning inductors are pluggable, they plug into radios for use on certain bands. This one has thick winding wire so I would guess it's for a transmitter. The capacitor looks European?

      Keep an eye out for more of them, they belong to a particular ham radio. Just stuff'em in a bag when going through the estate.

      Comment

      • gahuubard
        New Member
        • Dec 2022
        • 4
        • USA

        #4
        Re: Mystery Component

        Originally posted by redwire
        These tuning inductors are pluggable, they plug into radios for use on certain bands. This one has thick winding wire so I would guess it's for a transmitter. The capacitor looks European?

        Keep an eye out for more of them, they belong to a particular ham radio. Just stuff'em in a bag when going through the estate.
        So far this is the only one I have found but I do have a little more digging to do. I have all of the identified components sorted into tubs... "Caps", "Resistors", "Transistors", etc. All of the unusual (to me at least) stuff if going in a "Misc" tub. I appreciate the info on this inductor!

        Comment

        • gahuubard
          New Member
          • Dec 2022
          • 4
          • USA

          #5
          Re: Mystery Component

          Originally posted by stj
          some type of tuning coil for a resonant circuit.
          the screw at the bottom pushes a core into the center of the coil on the outside causing the inductance to change
          I would like to make some measurements but from what I just read you can't really do that with a DMM. Sounds like I need to buy an LCR meter?

          Comment

          • stj
            Great Sage 齊天大聖
            • Dec 2009
            • 30950
            • Albion

            #6
            Re: Mystery Component

            yes, and it may depend on the voltage too.

            Comment

            Related Topics

            Collapse

            • shelby5041
              clock radio / radio lifespan?
              by shelby5041
              hi
              ive got a modern digital clock radio approx 15yrs old

              my question is how long can a clock radio or a simple radio last ss farcas operating hours?

              since elec components have limited hour lifecspan i would imagine the radio or clock radio would eventually fail.

              the reason i ask is because i have my clock radio on radio function 24/7 for the past 7 years and its still working fine....i leave the radio on ..never turn off past 7years...thats approx 60000 hours

              it uses very little power just a few watts i would imagine that may have something...
              09-14-2024, 03:30 AM
            • praveenramavath
              Majority PETERHOUSE GRADUATE Internet Radio (Auna Silver Star) - Stuck at boot "Welcome" Screen
              by praveenramavath
              Hello All,

              I have an issue with my Majority PETERHOUSE GRADUATE Internet Radio, it keeps rebooting at the boot logo Welcome screen. I have an another forum active in other website but due to lack of response I am posting the same here. I am positing a link below that has pictures including all the troubleshooting I have tried, appreciate if someone can take a look and give me any suggestions.

              https://www.hifivision.com/threads/m...-screen.98243/


              Troubleshooting Summary: Majority Internet Radio - Flash Chip
              ...
              04-26-2025, 09:08 AM
            • Document Archive
              HP EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point EliteDesk 800 i7-7700T Specification for Upgrade or Repair
              by Document Archive
              This specification for the HP EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point boardview and EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information....
              09-12-2024, 02:00 PM
            • Omron
              Kenwood KDC 3051G Car Radio permanently stuck in Demo Mode please help
              by Omron
              Hello Guys! I have trouble with my car radio Kenwood KDC 3051G I hope someone more knowledgeable can help me, I tried everything in my power that I stumbled upon online.

              My radio is permanently in demo mode, it says Press Volume Knot Cancel Demo and when I press it nothing happens.

              - Tried to unplug radio and plug it back in into power,

              - Tried to reset radio by holding reset button key for 5,10,30 seconds while in power and without power, plugging it back in, it wouldn't work.

              - Tried to hold 3,6 while turning it back on and then pressing 1,2...
              05-23-2024, 01:27 PM
            • TinkerTron
              Schematic vs. Reality: Where Are the Resistors on My Sharp Clock Radio? Model FY-70CH
              by TinkerTron
              Hey everyone,

              I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.

              Instead, here's what's been bugging me so far:
              The schematic...
              03-06-2025, 02:03 PM
            • Loading...
            • No more items.
            Working...