EMMC programming BGA 169 (ANDROID SOFTWARE)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Richi_el
    Senior Member
    • Nov 2013
    • 95
    • Koln

    #1

    EMMC programming BGA 169 (ANDROID SOFTWARE)

    Hi,
    i have a problem with a device wich is not starting --> issue a damage on the Emmc 7 GB Micron flash. (see in pic 1)

    i have desolderd a healthy Emmc and the plan is to put in into my progamming device i try to make a Image of the whole Software on BGA.
    (see on pic2)

    Afterwards i want to burn a new EMMC Bga to resolder it on the device.

    I can read the media inside the healthy Emmc with linux reader software for win7 called diskinternals (see on pic 3) but even when i try to make an image with HDCLONE oder each other programm it stucks and the process cant finish.

    Somebody know something about the reason or another software which is able to download an image of that Emmc ??

    Thanks for help....
    Attached Files
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30917
    • Albion

    #2
    Re: EMMC programming BGA 169 (ANDROID SOFTWARE)

    think about it.
    the reason the device wont run is because some data in the original chip is corrupt.
    your copying is freezing because it's trying to read the corrupt sectors/files

    Comment

    • Richi_el
      Senior Member
      • Nov 2013
      • 95
      • Koln

      #3
      Re: EMMC programming BGA 169 (ANDROID SOFTWARE)

      the emmc (inside the porgrammer) wich i try to backup is desolderd from a working device wich was working fine.

      Comment

      • CapLeaker
        Leaking Member
        • Dec 2014
        • 7972
        • Canada

        #4
        Re: EMMC programming BGA 169 (ANDROID SOFTWARE)

        probably the program does not copy something, which the device needs to start with. What device / OS are you trying to copy?

        Comment

        • Richi_el
          Senior Member
          • Nov 2013
          • 95
          • Koln

          #5
          Re: EMMC programming BGA 169 (ANDROID SOFTWARE)

          Maybee yes but why it does not work ? isnt it possible to image the whole emmc incl. bootfiles ect....??? it is also possible to make a img from a hdd (with windows)

          the emmc have 7 partions with android (linux) operating system but also a windows partion as u can see in the picture.
          Attached Files

          Comment

          • CapLeaker
            Leaking Member
            • Dec 2014
            • 7972
            • Canada

            #6
            Re: EMMC programming BGA 169 (ANDROID SOFTWARE)

            Maybe complain to the software vendor and ask them?
            Last edited by CapLeaker; 01-06-2019, 05:37 PM.

            Comment

            • stj
              Great Sage 齊天大聖
              • Dec 2009
              • 30917
              • Albion

              #7
              Re: EMMC programming BGA 169 (ANDROID SOFTWARE)

              use the DD command in Linux.

              Comment

              • capwizard
                Badcaps Legend
                • Jun 2016
                • 1991
                • USA

                #8
                Re: EMMC programming BGA 169 (ANDROID SOFTWARE)

                This might help you.
                Last edited by capwizard; 01-08-2019, 11:36 PM.

                Comment

                • Richi_el
                  Senior Member
                  • Nov 2013
                  • 95
                  • Koln

                  #9
                  Re: EMMC programming BGA 169 (ANDROID SOFTWARE)

                  Many thnx i orderd it yesterday, will keep u updated

                  Regards...

                  Comment

                  Related Topics

                  Collapse

                  • EazyBone
                    Hisense 55H8F Emmc programming help
                    by EazyBone
                    I am extremely new to programming and dipping into this. I picked up a XGECU T48 Programmer and have the correct socket for EMMC.
                    I took the EMMC off a working main board with no problems and threw it into the programmer. I click analysis IC and it gives me a report (attached) of the current EMMC. Model H26M41204HPR

                    1) I manually found this chip(above model number) in the select IC section of the XGPRO 12.xx programmer software and it had a option for 4 bit and 1 bit. I chose 4... is this correct?

                    2) In the options section point number 2 operation says "30...
                    06-11-2024, 06:03 PM
                  • PontyPCs
                    Sony Android TVs eMMC Issues
                    by PontyPCs
                    Hi people.

                    I have been trying to get my head round these issues with the eMMC putting the TV in to a boot loop condition, or completely dead, when a dump of the Boot 1, Boot 2 and USERDATA partitions have been made, the MLC lifetime counter has been reset, using the original eMMC with the RPMB partition intact and the eMMC is flashed with the original dump, Netflix and a few other Apps don't work. i assume all the DHCP keys and factory programmed RPMB access Key will be contained within the original dump, and as we are re-flashing the original eMMC i would expect every thing to work....
                    12-10-2023, 10:43 AM
                  • CornholioGSM
                    RT809H - direct read Toshiba eMMC timeout error
                    by CornholioGSM
                    Hello all,
                    help needed.
                    I want to made backup of boot and all partitions from emmc desoldered from old phone.
                    So i have wired emmc directly to RT809h - Dat0, GND,CMD, CLK, VCC, VCCQ - on programmer sw set Smart Identify to EMMC ISP and voltage to 3.3V.
                    In Settings (N) i have set area to user, boot1,boot2 and EXT and vccq set to 1.8V (tested 3.3V too).

                    Problem is, that i still get Read Timeout Error

                    OK - emmc can be dead...so i have tested emmc wires connection to micro SD adapter and then in card reader and emmc was detected.

                    So...
                    01-16-2025, 04:34 PM
                  • BOSCHNJAK
                    looking for programming software for board ETON.ET866 1302.2Z2
                    by BOSCHNJAK
                    I am looking for programming software for board ETON.ET866 1302.2Z2. This PCB is built into the Switching Power Supply from ACBEL model FSA011 and I need information on how to program that PCB, On the board there is a small connector with 5 pins.
                    I need a programmer or emulator to access this board and adjust the voltage from 12.2 volt DC to 13.8 volt DC.
                    Can anyone help? Pictures attached.
                    12-27-2023, 04:14 AM
                  • imran333
                    Anyone recognise this emmc programming software and device ?
                    by imran333
                    I saw this software on a foreign forum where you have to pay to get advice but the website doesn't seem great when translated and hardly anyone speaks English there, I saw this software they use for programming the emmc on Sony android boards but can't figure out what device or software it is, here's a picture of the software and maybe someone knows what it is ?...
                    03-18-2023, 08:40 AM
                  • Loading...
                  • No more items.
                  Working...