Hey Spork and all you guys in the US. I thought I would post a website that sells surplus and random stuff fairly cheap. http://www.goldmine-elec-products.com/ . Check it out. They've been annoying me with emails for a couple years now.
-
Got something new. Recently I got trouble with receiving emails and syncing OneNote. Nothing else. I still can stream 24x7, VOIP, have full speed internet, but in the world cannot receive any emails nor sync OneNote. Take the computer somewhere else to a different internet location and no problems at all.
Points to the router, right? NOPE! 
Hooked up my computer directly to the modem (which is in bridge mode) and have the same problems! 
Put all the network shit back together, start my VPN provider app, choose the closed VPN server to me and all the problems are gone! 
Is...
-
This is a new item at Electronic GoldMine that has arrived within the last few weeks
Here is the link for them I know for sure that it works because ( I tried it on mine soldering station ) I bought two of them and I just bought two more of them so I have some extra replacement ones in my parts bin
Stahl Tools DDDS Replacement Iron for DSDS Stahl Solder Station
https://theelectronicgoldmine.com/products/g28392
One note it will not work for the ZD-917 or similar model number that does not have the sleep function that are the same iron but the plug only...11-24-2024, 01:25 AM -
There seemed to be some interest in the Electronic load I was using in my Solid Gear SDGR-500BX review here:https://www.badcaps.net/forum/showthread.php?t=85860
So I thought I'd do a separate review on it.
This unit is widely available on Ebay, Amazon, etc. I paid $145 for it with this listing:
https://www.ebay.com/itm/30A-Dual-Ch...53.m2749.l2649 but prices may very slightly.
Here's the unit
... -
hello
today i have laptop Acer aspire V5-591 DA0ZRYMB8G0 REV: G MODEL: ZRY
the problem of this notbook is powering on but black screen, when i verifing the motherboard i found TWO electronic component not found! AS PICTURES BELOW please help
,thanks ADVANCED.... -
ok so i built a box to test the electronic dashboards on countax ride on mowers , all works fine and can test all functions with the aid of switches buttons and lights . only thing is the engine rpm that i cant check so need some sort of oscillator i can put together with parts from my stock . and need confirmation where to connect it to on the board . engine kill is short to ground and with it being connected to the coil i presume the signal comes from there .
thinking will need 1000 to 3000 rpm variable .
will post pics of my build later .