doubt on osciloscope to buy

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • highpulse
    i hate HP
    • May 2013
    • 1488
    • portugal

    #1

    doubt on osciloscope to buy

    hey guys, seeking for a osciloscope for the lab , well we do mostly work on laptop , consoles and lcd's , around does areas , im seeking a osciloscope that work ok , but not for huge prices ... seeking for something with simple and nice interface , and that make the function its intended to .

    wich models do you know and you're happy with ,, sugestion are welcome , need to buy one for the lab , and since its christmas , well its time for it
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 31046
    • Albion

    #2
    Re: doubt on osciloscope to buy

    either an old analog scope - atleast 50Mhz,
    or a Rigol DS1054Z
    http://www.rigol.eu/products/digital...1000Z/ds1054z/
    Last edited by stj; 12-22-2015, 06:35 AM.

    Comment

    • japlytic
      Badcaps Legend
      • Oct 2005
      • 2086
      • Australia

      #3
      Re: doubt on osciloscope to buy

      What types of signals need to be measured? This can be helpful in determining the required amount of bandwidth plus a certain percentage.
      My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.

      Comment

      Related Topics

      Collapse

      • sdogs
        Macbook pro 13 A2442 820-02098 Touch ID doubt
        by sdogs
        I have a macbook pro 14.1 A2442 that has had contact with liquid, the affected area is the one near the touch id connector (see image). I carefully cleaned the affected area but the UT600 chip (LM3638A0) seems to be in poor condition and probably needs to be replaced.
        I searched online and found the replacement but it is indicated as a spare part for iphone 6 and 6 plus and at this point I had a doubt, does this chip have some type of programming?
        Forgive the question, I'm just an enthusiast but I had this doubt and before ordering the spare part I wanted to be sure I wasn't doing...
        09-24-2024, 02:36 AM
      • chth96
        What capacitor should I purchase for Power Supply of obsolete game consoles?
        by chth96
        hello.

        I have Sega Saturn and 5 years ago, I recapped all of capacitor in the Power supply, Because At that time, It frequently freezed black screen after SEGA logo displayed.

        It hardly ever freezed after I finished to recap all of caps in the power supply.

        But Yesterday, It did not show any screen at all and its green power LED constantly blinked.

        To my surprise I found that all of two NXH 10v 2200uf capacitors in the secondary area of Power supply have been bulged and It measured 57 mF and 75 mF capacitance.

        It seems that quality...
        10-01-2024, 08:14 AM
      • SarcasticOP
        Seeking Guidance on Motherboard Diagnostics
        by SarcasticOP
        Hello everyone!

        I hope this is the correct place to post this, if not please let me know and I will post in the appropriate location.

        I'm venturing into the intricate world of board repair within electronics, and I'm reaching out to this community for some guidance and shared wisdom. I have tried to do some research myself and find this information on my own, but I don't know what I don't know, and that is really starting to become an insurmountable issue that I cannot overcome. The only person I had nearby that I could turn to passed away recently so I do not have anyone...
        01-10-2024, 03:35 PM
      • Athhos
        Surface Pro 4 boards doubt.
        by Athhos
        Good Afternoon.
        I have a doubt about I7 SP4 boards (Board X911788-009)
        Tried some searches online but didn't found anything.
        Having some boards i saw that two ones differ because some components aren't where it should.
        There is any demo version of SP4 I7?
        How may I check if it's a 8GB/16GB version?
        I'll attach the photos to show it.
        Because they're faulty I need a way to start the repair.
        Regards.
        12-22-2023, 10:35 AM
      • Hypersapien
        Artist seeking to tinker with electronics safely
        by Hypersapien
        Howdy folks! I'm an artist in the video game industry, and my job entails making a lot of mechanical and sci fi assets. I thought it might be a good practice to start disassembling some electronics to be more familiar with how real electronics are manufactured and assembled, which is how i found my way to these forums.

        When I started researching what tools I might need, I quickly encountered the warning "Some devices can maintain a potentially lethal charge in their capacitors, even up to years after last being powered on", which was enough of a scary thought for me to...
        10-22-2023, 01:31 PM
      • Loading...
      • No more items.
      Working...