Try our *UPDATED* boardview, bios, & schematic search. Over 2.3 million files for download!

Epson 1060 – Unknown TI buck regulator IC (markings: TI 741 / A6N6) – need help identifying

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tomylee
    Senior Member
    • Oct 2024
    • 64
    • Canada

    #1

    Epson 1060 – Unknown TI buck regulator IC (markings: TI 741 / A6N6) – need help identifying

    Hey everyone,
    I'm working on an **Epson 1060 projector** and I've tracked down a faulty IC on the board. The markings on the chip are:

    **543352 / TI 741 / A6N6**

    I believe it's a TI step-down converter (buck regulator). I already tried replacing it with a **TPS54335ADRCR** (https://www.digikey.ca/fr/products/d...5ADRCR/5226727), but it's not the right one — it's shorting out the surrounding capacitors(Marked in Blue in the pictures), so the pinout or specs must be off.

    I've looked around DigiKey and there are several similar parts in that TI family, but without a schematic for this projector I can't figure out which exact variant is correct. I can't find any service manual or board-level schematics for the Epson 1060 anywhere.

    Does anyone recognize this marking and know the exact part number? Bonus points if you can share a DigiKey link!

    Thanks in advance ans have a great day!
    Attached Files

    Premium supporters get full download access and other benefits.

  • lotas
    Badcaps Legend
    • Jan 2016
    • 5398
    • Russia

    #2
    TPS543352
    https://www.ebay.com/itm/395706660647
    Attached Files

    Premium supporters get full download access and other benefits.

    Last edited by lotas; 04-13-2026, 05:24 PM.

    Comment

    • Tomylee
      Senior Member
      • Oct 2024
      • 64
      • Canada

      #3
      Thanks a lot Lotas! Can you give me a Digikey link if you have one by any chance? The shipping takes a lot of time with eBay 😊

      Comment

      • lotas
        Badcaps Legend
        • Jan 2016
        • 5398
        • Russia

        #4
        https://www.digikey.com/en/products/...2ADRCR/6173927

        Comment

        • Tomylee
          Senior Member
          • Oct 2024
          • 64
          • Canada

          #5
          Thanks a lot and have a great night Lotas !

          Comment

          • truclacicr
            Badcaps Veteran
            • Apr 2019
            • 398
            • australia

            #6
            https://www.ti.com/packaging/en/docs...marking=543352

            Comment

            • Agent24
              I see dead caps
              • Oct 2007
              • 5401
              • New Zealand
              • Electronics and computer repair

              #7
              Are you sure the capacitors weren't already shorted and killed the original IC?
              "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
              -David VanHorn

              Comment

              Related Topics

              Collapse

              Working...