Identify a burned component in Gimbal Zhiyun smooth-q3

[corrize]

Hello, in this device, there is a chip (managing battery I guess) burned.
I can’t read the full marking code because it is really damaged/burned.
With a best pictures, I deduced that :
8HA (or 5HA ?) and probably not 2HA or EHA or BHA
K20
296
But I can’t find a component on the web with these marking code. Do you know what it is please ?

[mon2]

Hello. Pour some IPA (alcohol - pharmacy stuff is great) to enhance the markings under a light.

The top horizontal bar = MPS.

For 'BHA' = MPS part # MP2672GD

You can source this part from Digikey and other authorized distributors or from Aliexpress.

Datasheet is attached.

[mon2]

Hello. Pour some IPA (alcohol - pharmacy stuff is great) to enhance the markings under a light.

The top horizontal bar = MPS.

For 'BHA' = MPS part # MP2672GD

You can source this part from Digikey and other authorized distributors or from Aliexpress.

Datasheet is attached.

[corrize]

thank you, 🙂 very unexpected the top bar is a brand
I cleaned it 20 times with a toothbrush and alcohol. The chip is deformed and bulging due to the heat. I couldn't do any better.
I will order it.