Hi i need help identifying this IC marked MZ8b. its coming off the DC jack for a mini pc. is there any measurements I can take to help identify it? looked online, found nothing
Thanks!
Thanks!
Attached Files
-
Last edited by silver60618; 01-05-2024, 06:13 PM. -
Could it be an adjustable LDO regulator? Can you measure the voltages on each pin?
1 - Feedback
2 & 3 - Vin
4 & 5 - Vout
6 - GroundLast edited by truclacicr; 01-05-2024, 11:51 PM.
-
Hello. Could you help me identify the code for this component marked .11?
It belongs to the BMW X1 automotive gear selector circuit.... -
I am not able to identify this element marked A22020. Some short indexes suggest it is a n-channel mosfet or a pnp transistor. I measured it and it looks to have only a very small capacitance between pins 2 and 3. Any suggestion would be very important. In my experience whatever it should be a dead component. The device is a level radar which looks no current consumption although 12V and 3.3v are ok at MCU and in the circuit but no data transmission?... -
Hi,
Please can you help me identify this IC which is obviously dead, for a HP omen 16.
It 16pin IC with B3FBE inscription.
Board : jpr6f la-m783p
Thx.... -
As the title says. Can anyone please help identify this ic.
Kind regards.AGRN16957... -
Comment