Hi guys,
I bought faulty Elmasonic S300H ultrasonic cleaner with shorted Cypress microcontroller which I replaced but now machine just turns on with every possible LED on and that's it more or less, it's unresponisive on any button pressed.
I need dump for CY8C27543 which is my 1st problem, other problem is I don't know how to program it and if there's some universal chinese programmer available. I don't want to pay 200USD for original programmer I will probably use once in a lifetime such as Miniprog1 or newer.
If anybody got experience with flashing such chips please let me know, I only programmed PC bioses and ECs so far
I bought faulty Elmasonic S300H ultrasonic cleaner with shorted Cypress microcontroller which I replaced but now machine just turns on with every possible LED on and that's it more or less, it's unresponisive on any button pressed.
I need dump for CY8C27543 which is my 1st problem, other problem is I don't know how to program it and if there's some universal chinese programmer available. I don't want to pay 200USD for original programmer I will probably use once in a lifetime such as Miniprog1 or newer.
If anybody got experience with flashing such chips please let me know, I only programmed PC bioses and ECs so far