Hello,
does anyone know where to find datasheet for it8225vg chip? I can't find it on their official website.
does anyone know where to find datasheet for it8225vg chip? I can't find it on their official website.
-
-
Re: Datasheet for it8225vg needed
It's one of those cr@p sites where you need to register to see any of the attachments ...
https://vin%61fix.com/threads/datash...25e-128.40418/
https://vin%61fix.com/attachments/it8225e-pdf.198463/
-
I can't find the datasheet for this chip's schematic. Can someone with information please answer?... -
I'm trying to extract firmware from a GoXLR-Mini
https://www.tc-helicon.com/product.html?modelCode=P0DI7
I know it's not ideal, but I'm trying to extract the 64MB firmware without removing the chip. I've done this before, but I realize it's a case-by-case thing. Unfortunately, it seems this board's layout results in it getting powered by my SPI tool (Buspirate), failing extraction.
I believe the issue is the flash chip's HOLD pin unable to get pulled high, as the current for that pin dissipates elsewhere in the circuit. When I try to pull the HOLD pin... -
Hi All
Had tried using google lens but not much info was provided.
Appreciate if you can help identify this component.
IC Seems to be SOT-23.
Thank You... -
I am trying to find two smd datasheets for an Apevia 1000w prestige power supply ATX-PR1000W the SMD's are ST9S313 which is a SMPS supervisory chip and a EST 915HP or XP48024 not sure which or both is the chp prod number and the schematic
-
Hello,
My Dyson Pure Hot+Cool, model HP00, no longer starts.
After disassembling and accessing the electronic motherboard, I found that the 16A fuse soldered to the motherboard is dead. I decided to do an electronic shunt to see the reaction, and the Dyson turns on for a few seconds and then turns off.
It is likely that a voltage control chip or a safety chip is dead, but without the electrical schematics, the repair becomes complicated…
Thank you in advance for your help.
Best regards
Comment