hello everyone, I have a ch431a programmer, I want to program an electric bike microcontroller. I watched a video on youtube. It's programming on paython with TTL connection, but I don't know if the microprocessor is the same. I have a xc836 microcontroller on my card, on which feet I can program this controller, if anyone can help, it's very helpful. i'm glad.
-
-
Re: How to program mikrocontroller with TTL connectin
Datasheet XC836
https://pdf.ic37.com/INFINEON/XC836_...6/XC836_8.html -
Re: How to program mikrocontroller with TTL connectin
thank you for answer, I read the datasheet, I even made a ttl connection with the txd_1 and rxd_1 terminals. I tried to connect to the chip, while I forgot to give the chip at 5 volts, but I still couldn't access the chip. What other terminals do I need to connect or can I find a diagram about it?Comment
-
Re: How to program mikrocontroller with TTL connectin
I am trying to help, but I have not experiance in that region. I guess that IC have I2C or SPI protocol as well, maybe somewhere on board is place for flash connector, pads, or testpoint. The good few picture will help too somebody who is expert. Also, you can give link to video you mentioned, for reference... some IC have UART natively but some has only option to do so with flashed programm. I think
Comment
-
This specification for the Toshiba Portege X30-E-10U + TARGUS BIKE BACKPACK GR Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the X30-E-10U + TARGUS BIKE BACKPACK GR boardview and X30-E-10U + TARGUS BIKE BACKPACK GR schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that...09-06-2024, 06:31 AM
-
This specification for the Toshiba Tecra X40-E-108 + TARGUS BIKE BACKPACK Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the X40-E-108 + TARGUS BIKE BACKPACK boardview and X40-E-108 + TARGUS BIKE BACKPACK schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer...09-06-2024, 06:31 AM
-
This specification for the Toshiba Satellite Pro R50-C-1DE + TARGUS BIKE BACKPACK GR Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the R50-C-1DE + TARGUS BIKE BACKPACK GR boardview and R50-C-1DE + TARGUS BIKE BACKPACK GR schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...09-06-2024, 06:31 AM
-
I'm having a random issue with this otherwise nice double oven/air fryer. It sometimes does not respond to the controls. Sometimes only the upper control buttons work, sometimes they all work and sometimes none of them work. The power supply is good as the control board has a steady 5V and 3.3V. The pushbutton switches are all good as tested with multimeter. When the buttons are working, there is about 2.5V to the high side of the pushbutton. I'm assuming pressing a button grounds the input pin to the microprocessor. When the buttons are not working, there is about 0.3 volts on the high side.... -
Epson M3170 Monochrome inkjet printer adjustment program tool.
Hi, i want to reset a epson reset program tool needed to reset the EPSON M3170 PRINTER's Maintenance box,
anyone having it, please share
Thank you
Comment