baofeng uv5r

stj

Great Sage 齊天大聖

Join Date: Dec 2009

Posts: 31138

Country: Albion
#1

baofeng uv5r

02-04-2023, 10:22 AM

can somebody who has one tell me the belt-clip length and spacing between the screws in mm please.

i want to put a belt clip on something else and uv5r ones cost peanuts on ali.
Tags: None

Previous template Next

1980s Holz Her 2420 belt sander - Only works when speed control at maximum

by Babbar

My fathers belt sander from the 80s which i very much would like to continue using has an issue with the speed control. The machine works fine on maximum speed but will not turn or give any sign of life when on any other setting. The speed control is a dial going from 1-6 although implemented as a potentiometer without distinct steps. I took the machine apart and measured each component individually, all components and measurements have been captioned in the attached pictures. The Triac did not get identified correctly using my cheapo component tester, i don't know if this is user error, if the...
- Channel: Troubleshooting Appliances and other Household Electronic Stuff
11-13-2024, 01:54 AM
Baofeng walkie talkie UV-16 PRO Mate not charging via usb type c.

by thesame

I use to charge it via type c and It stopped charging , with the usb c connected i measure 5V on the pins that are going to the battery , and on the working one i can measure 9V on the pins, after opening it i found this sot23 smd marking ACA9E burnt, and i don't know what to replace it with. Some people say it can be SY8008CAAC wich is a Synchronous Step Down Regulator others say it could be voltage detector like XC6114B545MR....

5 Photos
- Channel: Troubleshooting Audio Equipment
Today, 09:33 AM
Aiwa ad-wx 717 belt measure

by falcontech

Hello
Could someone tell me what size the drive belt of the aiwa ad-wx717 cassette deck is, I would like to buy it independently in my trusted shop, there is a kit online but I find the price exaggerated, unfortunately the original has practically melted. it is a double plate and the belts are the same, the one of the tachometer has remained intact thanks
- Channel: Troubleshooting Audio Equipment
02-23-2023, 12:34 PM
HP Pro Book 460 G11 Board DA0X8VMB8G1 REV:G Slow Clap for HP Bad ram shield to component spacing.

by abajor

Had someone drop off a laptop in which they were upgrading the ram but forgot to unplug the battery.
Looks like the ram RFI shield shorted a rail going to or coming from a Silergy IC which blasted a component off the board. I'm going to assume it was a cap but really have no way to know for sure since this board schematic doesn't appear to be in the wild yet.
I'm trying to identify the IC model now but it doesn't appear to match any of the Silergy codes from https://www.badcaps.net/forum/troubl...-tablets-and-m...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
11-01-2024, 12:50 PM
I would like an explanation of how a laser can measure a product on a conveyor belt

by sam_sam_sam

I saw this on

“How do they do it “

The laser was measuring the diameter and the height of the product and the weight of the product and it was a straight line laser light across the the conveyor belt ( this is all that was shown in the video clip of the laser that was used )

What type of product is this that can do this

I want to thank anyone that knows what of laser this is
- Channel: General Electronics Technical Discussion
04-24-2022, 07:55 AM
Loading...
No more items.

baofeng uv5r

Related Topics